User`s guide

List of Functions
56
f SNMP Menu
You can set the SNMPg. To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be
managed by a network administrator.
Sub Menu Function
SNMP trap IP
addressg 1/ SNMP
trap IP address 2
You can register up to two for the SNMP trap notification destination.
The IP address
g registered in "Trap IP Address 2" is used when the IP address in "Trap IP Address 1" cannot be accessed.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)