User`s guide

30
Remote Control of Two or More Projectors
When using two or more projectors, you can operate only the projector
having a specific ID if you register the same ID to both the projector
and the remote control.
Set the projector ID in the configuration menu. Set the remote control
ID by the [ID] button and numeric buttons on the remote control.
Setting the Projector ID
A
Press the [Menu] button and select "Extended" -
"Projector ID" from the configuration menu.
s "Using the Configuration Menu" p.40
Check the buttons you can use and the operations they perform in
the guide under the menu.
B
Choose the ID you want to set and press the [Enter]
button.
q
• The default projector ID is "Off" and default remote
control ID is "0".
• When the projector is turned off and turned on again, the
remote control ID returns to its default.
Procedure
Using the remote control Using the control panel