User Guide

6
Using the Toolbar
The toolbar is displayed when EMP NS Connection is started up and
the connection is made with the computer.
Icon Names and Functions
Select target
projector
Displays the "Select target projector" dialog box.
Deselect the check box for the projector you do
not want to operate.
Stop Stops projection of computer images while
connecting to the projector. While projection is
stopped, a black screen is projected. Also, pause is
canceled.
Show The projector starts to project the computer image.
Also, stop or pause is canceled.
Pause Pauses projection of computer images when
connected to the projector.
Presentation
Mode
In this mode, only PowerPoint slideshow images
are projected by the projector.
Projector control Displays the Projector control screen. You can
perform "A/V Mute", "Switch PC Source", and
"Switch Video Source" from the Projector control
screen.
Preview Displays the multi-screen preview screen.
Set options Transmission performance during the transfer of
computer images can be adjusted.
Movie Sending
Mode
Displays the screen for selecting the destination
projector for Play Movie. Only one projector can
project movies.
Disconnect Disconnects the connection to the projector.
Wireless
indicator
This is displayed when the connection is made in
the "Quick Connection mode". This displays the
ESSID signal strength. The stronger the signal
strength is, the number of lit indicators increases.
Switch toolbar
display
When a connection is made in the "Quick
Connection Mode", the toolbar display can be
switched to "Full", "Normal" and "Simple" in
order from the top as follows.