User Guide

PC Free Basic Operations
44
f Closing PC Free
A
Tilt the [h] button on the remote control up to
position the cursor on the "Exit" button.
B
Press the [Enter] button on the remote control.
PC Free shuts down and the EasyMP standby screen is displayed.
C
After turning off the power supply to the digital
camera or the USB storage device, disconnect it
from the projector’s USB Type A port.
When a CompactFlash card is in use, check the status of the access
indicator at the card slot before removing the card.
Procedure
q
If you leave the USB storage device connected when you
close PC Free and the EasyMP standby screen is displayed,
disconnect the USB storage device and reconnect it before
starting PC Free again.