User Guide

Connecting in Wireless LAN Advanced Connection Mode

Select the projector you want to connect to. You can

connect up to four projectors at the same time.

Click the "Connect" button.

When "Projector Keyword" is set to "ON", enter the

projector’s keyword when the projector’s EasyMP

screen is displayed and click the "OK" button.

A computer and the projector are connected via a network and the

computer’s screen is displayed.

The EMP NS Connection toolbar is displayed on

the computer screen. Use this toolbar to operate the projector, make

settings, and disconnect the network connection.

For details on using the toolbar, see "Using the Toolbar" s p.6.

• When you select a projector that is connected to another

computer, the computer that it was connected to is cut off,

and the image of the computer connecting now is

projected.

• After connecting, you cannot add another projector to be

connected.

• When continuously connecting from another computer,

for example, with different presenters, start EMP NS

Connection on the computer to be used and make a

connection. The connection to the computer that is

currently connected is cut off, and the connection is made

to the computer that is trying to connect now.

• When projecting computer images by using Network

Presentation, see "Connection Limitations"

p.75 for

details on restricted items, such as compatible resolution

and display colour.