Service manual

4-52
CONFIDENTIAL
EMP-1825/EMP-1815/EMP-1810
SEIKO EPSON Revision:C
C A U T I O N
 When installing the Filter Board Unit, make sure to observe the following
points.
• The black cable must cross over the white cable.
• The fuse holder must not contact with the cable
Figure 4-62.
 Before installing the Lamp Duct, attach the BS sheets to the Lamp Duct. Make
sure to align the sheets’ corners with the corners indicated by the red lines in
the figure (within an error of ± 1 mm).
Figure 4-63.
Filter Board Unit
Fuse holder
Lamp Duct