Service manual

4-46
CONFIDENTIAL
EMP-1825/EMP-1815/EMP-1810
SEIKO EPSON Revision:C
4.5 Removing Other Main Parts
4.5.1 Removing the Inner Exhaust Duct A/Exhaust Fan Assy.
1. Remove the screw (C.C.SCREW,3X6,F/ZN-3C) that secures the Lamp Connector, and
release the Lamp Connector from the Inner Exhaust Duct A.
2. Remove the three screws (C.B.P-TITE SCREW,2.5X10,F/ZN-3C) that secure the Inner
Exhaust Duct A, and remove the Inner Exhaust Duct A while drawing out the Safety Switch
from the hole of the Inner Exhaust Duct A.
3. Remove the Exhaust Fan Assy. from the Inner Exhaust Duct A.
Figure 4-55.
Safety Switch
Lamp Connector
C.C.SCREW,
3X6,F/ZN-3C
Inner Exhaust Duct A
Exhaust Fan Assy.