Service manual

4-36
CONFIDENTIAL
EMP-1825/EMP-1815/EMP-1810
SEIKO EPSON Revision:C
C A U T I O N
 (EMP-1815/1825 only) After installing the IM Shield Plate and the IM
Fastening Plate to the IM Board Assy., attach the Gasket to the specified place
shown below in the direction of the arrow upward.
Figure 4-42.
 (EMP-1815/1825 only) When installing the IM Board Assy., be careful about
the following direction.
• Route the Cables from the RC board and the PBS Fan as shown in the figure
below.
Figure 4-43.
Gasket 10 x 10 (L=10)
IM Fastening Plate
IM Shield Plate