Service manual

4-4
CONFIDENTIAL
EMP-1825/EMP-1815/EMP-1810
SEIKO EPSON Revision:C
4.1.4 Tools and Equipment
The table below lists the tools and equipment required for servicing the projector. All are
commercially available, and should be made ready beforehand.
* q.s.: sufficient quantity
Table 4-1.
Name Qty. Application
Phillips screwdriver No. 0 (8cm) 1
Disassembling the focus ring and the zoom
ring
Phillips screwdriver No. 1 (10cm) 1
Disassembling the outer case and inner com-
ponents
Phillips screwdriver No. 2 (10cm) 1
Disassembling the outer case and inner com-
ponents
Flathead screwdriver 1 Disassembling the rear foot and the front foot
Hexagonal box screwdriver (5 mm) 1 Removing the computer interface
Tweezers 1 Removing the FPC cable
Heat-resistant tape q.s.* Securing cables
Brush 1 Cleaning away dust
Vacuum cleaner 1 Cleaning away dust
Lens cleaner q.s.* Cleaning the projection lens
Air blower 1 Cleaning the light valves and fans
Gloves 1
Anti-static wrist band 1