Service manual

5-6

CONFIDENTIAL

EMP-1825/EMP-1815/EMP-1810

SEIKO EPSON Revision:C

7. Press the [QuickSetup] button once.

• The calibration at the Wide position starts.

• When the calibration has been successfully finished, the image changes to a big "C (rep-

resenting "Center") automatically. [Pause Window 2]

Figure 5-4. Pause Window 2

• If the Zoom Ring is not set to the end of the Wide side, the image returns to the "W"

(Pause Window 1) automatically.

• If this calibration has been failed, the [Unsuccessful Termination] window is displayed.

(refer to [Unsuccessful Termination] window (p. 7))

8. Adjust the Zoom Ring manually to the center position as shown in the figure below.

Figure 5-5. The Center position of the Zoom Ring

9. Adjust the focus of the projected image with the Focus Ring.

Focus Ring

Zoom Ring