Installation guide

ADJUSTMENT OPTIONS
VERTICAL ADJUSTMENT
Using both adjustment screws on the left and
right you can adjust the position of the
projector by approximately 5 degrees upwards
and 3.5 degrees downwards. You can lower
or lift the front left or right corner.
TILT ADJUSTMENT
By lifting the front left or the front right
corner an adjustment of 3.5 degrees upwards
and downwards is possible.
8.
HORIZONTAL ADJUSTMENT
By turning the single round adjustment screw,
placed on the side of the frame, you
can move the back of the projector
to the left or to the right by approximately
5 degrees.
adjusting screws
adjusting screws
single adjusting screws