Service manual

EPSON ELP-3500 Service Manual
3-14
3.2.8 Removing the Speaker Units
Prerequisite: Complete the steps explained in Section 3.2.1.
Screws
Screw
Figure 3-17.
1. Remove 3 screws mounting the speaker unit and remove the speaker along with the
bracket.
Screws: +M3x8 F/Zn: P-Tight P/N 1021824
Mounting torque: 6.0 kg cm = 5.2 lb inch
Caution:
1. The speaker unit contains a permanent magnet. Keep it away from electromagnetic
media such as diskettes and magnetic cards.
2. When mounting a speaker, align the 3 screw holes in the speaker with those in the
frame; then tighten the screws with same tightening torque.