Service manual

EPSON ELP-3500 Service Manual
3-12
3.2.6 Removing the Safety Switch
Prerequisite: Complete the steps explained in Section 3.2.1.
Screws
Fast-on Tabs
Safety Switch
Figure 3-14.
1. Disconnect the Fast-on tab terminals for the 2 cables connected to the safety switch.
2. Remove 2 mounting screws from the safety switch and detach the safety switch.
Screws: +M3x8 F/Zn: P-Tight P/N 1021824
Mounting torque: 6.0 kg cm = 5.2 lb inch
Caution:
When removing the Fast-on terminals, do not apply excessive force to the terminals on
the safety switch in the horizontal or vertical direction.
* The polarity of the cables (blue/white) is not significant; connect them to any terminals
on the safety switch.