Service manual

EPSON ELP-3500 Service Manual
3-6
(Continued from the previous page)
Screws
Figure 3-6.
Interface Unit
Driver Board
Control Panel
Speaker
Projector Lens
Speaker Cable
Figure 3-7.
4. Hold the left and right sides (handle and fan guard sides) of the upper case unit and
lightly pull the handle straight up.
5. Disconnect the speaker cable from connector CN400 on the main board
6. Unlock connector CN504 on the main board before disconnecting the control panel
cable from it.
7. Remove the upper case.
8. Remove the handle out of the lower case unit.