Product Information Guide

EPSON ELP-3000 Data/Video Projector
Status Lights
The status lights at the top of the projector monitor its
operation.
temperature light 1 power light
lamp light
Gmen
Flaehing gmen
Flaehingmd
ProJector and lamp are on
Projector is receiving a eignal from
the remote control
There is a pmblem with the projector
Pin Assignments
The following tables describe the pin assignments for the
three connectors of the Y-cable: the LCD connector, the VGA
connector, and the Monitor connector. The pin assignments
for the VGA and Monitor connectors are identical.
LCD connector pin assignments
The LCD connector is a 26-pin D-style connector. Its pin
assignments are as follows:
7 IGreendigRal
cable ID
9
Redanalog
15
24 GND
16
Blue digital
3
25 VGA/no video cable
VGA and Monitor connector pin assignments
The VGA connector is a male video RGB, 15-pin micro-D
style connector, and the Monitor connector is a female video
RGB, Spin micro-D style connector. The pin assignments
for both connectors are as follows:
6 RedGND
7 GreenGND
A
Blue GND
sync input
14 Verficel sync input
15 NC
Related Documents
Engineering Change Notices
None.
Technical Information Bulletins
None.
Product Support Bulletins
None.
Related Documentation
4003816
EPSON ELP-3000 Data/Video Projector
Owner’s Manual
PL-ELP3000
EPSON ELP-3000 Data/Video Projector
Parts Price List
TM-ELP3000
EPSON ELP-3000 Data/Video Projector
Service Manual
17 Red digital
ID pin
4
26 Monochrome digital
19
(Hercules)
ELP-3000-2
4/95