Operation Manual
Table Of Contents
- Organization of the Guide and Notations in the Guide
- Contents
- Introduction
- Preparing
- Installing
- Connecting a Device
- Preparing the Remote Control
- Basic Operations
- Starting and Ending Projection
- Adjusting the Projected Screen
- Adjusting the Image
- Useful Functions
- Enjoying 3D Images
- Connecting with WirelessHD (EH-TW6600W Only)
- Using the HDMI Link Function
- Playing Back Image Data (Slideshow)
- Projecting Two Different Images Using Picture in Picture
- Configuration Menu
- Troubleshooting
- Maintenance
- Appendix
- Index
Configuration Menu
84
Memory menu
Function Explanation
Load Memory
Loads settings saved using the Save Memory function. s p.44
This cannot be selected if you have not saved any settings with the Save Mem‐
ory function.
Save Memory
Saves certain Image and Signal settings to memory. s p.43
Erase Memory
Erases settings saved to memory that you no longer need. s p.44
Rename Memory
Renames a saved memory. s p.44
Network menu
Function Explanation
Net. Info. - Wireless LAN
Displays the following network setting status information.
•
Connection Mode
•
Wireless LAN system
•
Antenna Level
•
Projector Name
•
SSID
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
•
Region Code
*
Network Configuration
Takes you to the network configuration menu. s p.85
*
This displays the available region information on your Wireless LAN unit. For more details, contact us at the
following address.
s Epson Projector Contact List
Notes on Network menu operations
When you select the Network menu, the menu tabs are changed.
The basic operations are the same as those for the Configuration menu.
However, when exiting the menu, be sure to select the Setup complete and then save the settings.
Yes:
Saves the settings and exits the Network menu.
No:
Does not save the settings and exits the Network menu.
Cancel:
Continues the Network menu.