Operation Manual
Table Of Contents
- Organization of the Guide and Notations in the Guide
- Contents
- Introduction
- Preparing
- Installing
- Connecting a Device
- Preparing the Remote Control
- Basic Operations
- Starting and Ending Projection
- Adjusting the Projected Screen
- Adjusting the Image
- Useful Functions
- Enjoying 3D Images
- Connecting with WirelessHD (EH-TW6600W Only)
- Using the HDMI Link Function
- Playing Back Image Data (Slideshow)
- Projecting Two Different Images Using Picture in Picture
- Configuration Menu
- Troubleshooting
- Maintenance
- Appendix
- Index
Useful Functions
66
a
Point the remote control at the
WirelessHD Transmitter, and then
press the
button.
Remote control WirelessHD Trans‐
mitter
Displays the sub-screen (small screen) for
the connected device.
Ex.) When projecting images for the device
connected to the HDMI2 port
b
The target screen changes each time
you press the
button.
c
After selecting the target screen,
please wait for a moment.
The projected image is switched.
c
The screen that is not receiving an image
signal is displayed in blue or black.
Ex.) When images for the device
connected to the HDMI2 port are not
displayed
The connected AV device is not turned
on, or the cables are not connected
correctly. Check that the AV device is
turned on, or all the cables required for
projection are securely connected.