Operation Manual

Submenu Function

Address 1 Set‐

ting/Address 2

Setting/Address

3 Setting

You can input the email address of the destination to send the

notification email to. You can register up to three destinations.

You can enter up to 32 single-byte alphanumeric characters for

the email address. The following characters cannot be used: " ( ) , ;

< > [ \ ]

You can select the problems or warnings to be notified about by

email. When the selected problem or warning occurs in the

projector, an email is sent to the specified destination address

notifying that a problem or warning has occurred. You can select

multiple items from the displayed items.

Others menu

Submenu Function

SNMP

Set to On to monitor the projector using SNMP.

To monitor the projector, you need to install the SNMP manager

program on your computer. SNMP should be managed by a

network administrator.

The default value is Off.

Trap IP Address

1/Trap IP Ad‐

dress 2

You can register up to two IP addresses for the SNMP trap

notification destination. You can enter a number from 0 to 255 in

each field of the address. However, the following IP addresses

cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x

is a number from 0 to 255)

Bonjour

Set this to On when connecting to the network using Bonjour.

See Apple's Web site for more information on the Bonjour

service.

s http://www.apple.com/

Message Broad‐

casting

You can switch the EPSON Message Broadcasting function to

enable or disable.

List of Functions