Operation Manual

ManualsBrandsEpson ManualsVideo projector projectorEH-TW570

100

Submenu Function

Passphrase

Enter the passphrase. You can enter at least 8 and up to 63 single-

byte alphanumeric characters.

When using it with EasyMP Network Projection, you do not

need to input the passphrase in the computer if it is the initial

(default) passphrase.

In the interests of security, we recommended that you change the

passphrase periodically. If the network settings are initialized, it

returns to the initial passphrase.

"Reset menu" p.97

You can enter up to 32 characters on the Configuration menu.

When entering more than 32 characters, use your Web browser

to enter the text.

s "Changing Settings Using a Web Browser (Web Control)"

p.75

In Quick mode, the initial passphrase is set.

Type of security

When the Wireless LAN unit is installed, it is strongly recommended that

you set security.

WPA is an encryption standard that improves the security for wireless

networks. The projector supports TKIP and AES encryption methods.

WPA also includes user authentication functions. WPA authentication

provides two methods: using an authentication server, or authenticating

between a computer and an access point without using a server. This

projector supports the latter method, without a server.

For setting details, follow the directions from the network

administrator of your network.

Mail menu

When this is set, you receive an email notification if a problem or warning

occurs in the projector.

"Using the Mail Notification Function to Report Problems" p.77

Submenu Function

Mail Notification

Set to On to send an email to the preset addresses when a problem

or warning occurs with a projector.

SMTP Server

You can input the

IP address

for the SMTP server for the

projector.

You can enter a number from 0 to 255 in each field of the address.

However, the following IP addresses cannot be used.

127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from

0 to 255)

Port Number

You can input the port number for the SMTP server. The default

value is 25. You can input numbers between 1 to 65535.

List of Functions