Operation Manual

Submenu Function
Display LAN Info.
Set the display format for the projector's network information.
When a QR code is displayed, you can connect to the network by
simply reading the QR code with Epson iProjection. The default
value is Text & QR Code.
s "Projecting Using a QR Code" p.63
Wireless LAN menu
Submenu Function
Connection
Mode
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If SSID Auto Setting is set to On, the projector
becomes an easy access point; if it is set to Off, the network is
created in
Ad hoc mode g .
If you select Advanced, the connection is established in
Infrastructure mode g through the access point installed.
Submenu Function
Channel
(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
The default value is 11ch.
SSID Auto Set‐
ting
(This can only be set if Connection Mode is set to Quick.)
When you set this to On, you can search for the projector more
quickly from among multiple projectors. SSID is set
automatically.
When connecting to multiple projectors from one computer in
Quick mode, set this to Off, and set the same SSID in all the
projectors that will connect.
SSID
(This item can only be set when SSID Auto Setting is set to
Off.)
Enter an
SSID g . When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters (: ^
can only be entered from the Web browser).
Search Access
Point
(This item can be set only if Wireless Power is set to Wireless
LAN On, and Connection Mode is set to Advanced.)
The projector searches for a local access point. This allows you to
perform wireless LAN setup by simply selecting the connection
location of the wireless LAN.
List of Functions
93