Operation Manual

Submenu Function
Operation
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Startup Source Search: Set to On to project images from
the port currently receiving an image when the projector
starts. Set to Off to project images from the same source as
the last time the projector was used.
Auto Power On: (Only available when Standby Mode is set
to Communication On.) When set to Computer, if the
projector receives an image signal from the computer port
when it is in standby status, the projector turns on.
USB Type B
USB Display: Enables USB Display.
s "Projecting with USB Display" p.34
Link 21L: Enables ESC/VP21 commands.
s
"ESC/VP21 Commands" p.78
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for Display
*1
and
Operation
*2
from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.99
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)" p.71
*2 Except for High Altitude Mode and Startup Source Search.
Network Menu
When Network Protect is set to On in Password Protect, a message is
displayed and the network settings cannot be changed. Set Network Protect
to Off and then configure the network.
s "Setting Password Protect" p.71
Submenu Function
Wireless Power
Set Wireless LAN On when connecting the projector to the
computer over wireless LAN. If you do not want to connect
via wireless LAN, turn it Off to prevent unauthorized access
by others. The default value is Wireless LAN On.
List of Functions
90