Operation Manual

e
Read the projected QR code with your smartphone or tablet
device.
Make sure you read the QR code from in front of the screen so that
it fits into the guide. If you are too far from the screen, the code
may not be read.
When the connection is established, the image from the connected
device is displayed. Tap Files on the application screen, and then
select the file you want to project.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to hide the image on the screen, or if you
do not want to show details such as when you are changing between files.
Each time you press the [A/V Mute] button or open/close the lens cover,
A/V Mute turns on or off.
Remote control Projector
a
• When projecting moving images, the images and sound continue to
be played back while A/V Mute is on. It is not possible to resume
projection from the point where A/V Mute was activated.
• You can select the screen displayed when the [A/V Mute] button is
pressed from the Configuration menu.
s Extended - Display - A/V Mute p.89
• When A/V mute is enabled with the [A/V Mute] button, A/V Mute
Timer activates and the power is automatically turned off after
approximately 30 minutes. If you do not want to enable A/V Mute
Timer, set A/V Mute Timer to Off.
s
ECO - A/V Mute Timer p.97
• When the A/V mute slide is closed for approximately 30 minutes,
Lens Cover Timer activates and the power is automatically turned
off. If you do not want Lens Cover Timer to activate, set Lens
Cover Timer to Off.
s ECO - Lens Cover Timer p.97
• The lamp is still lit during A/V Mute, so the lamp hours continue to
accumulate.
Projection Functions
65