Operation Manual

Correcting the Focus
You can correct the focus using the focus ring.
Adjusting the Volume
You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[
a] Decreases the volume.
[
b
] Increases the volume.
Using the remote control Using the control panel
• Adjust the volume from the Configuration menu.
s Settings - Volume p.88
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
Sets the Color Mode according to the surroundings. The brightness of the
image varies depending on the mode selected.
When a 2D signal is being input
Mode Application
Dynamic
Ideal for use in a bright room.
Living Room
Ideal for use in a room when the curtains are closed.
Cinema
Ideal for watching films in a dark room. Gives images a
natural tone.
Game
• Ideal for playing games in a bright room.
• It takes a few seconds to switch to Game mode.
When a 3D signal is being input
Mode Application
3D Dynamic
Ideal for use in a bright room. This is the brightest mode,
and reproduces shadow tones well.
3D Cinema
Ideal for watching films in a dark room. Gives images a
natural tone.
Adjusting Projected Images
43