Operation Manual
Table Of Contents
- Notations Used in This Guide
- Contents
- Introduction
- Useful Functions
- Changing the Projected Image
- Functions for Enhancing Projection
- Security Functions
- Projecting JPEG Images in a Slideshow
- Configuration Menu
- Troubleshooting
- Appendix
- Index
D
Take out the old Lamp by pulling the handle.
If the Lamp is cracked, replace it with a new lamp, or contact
your local dealer for further advice.
s Epson Projector Contact
List
E
Install the new Lamp.
Insert the new Lamp along the guide rail in the correct direction
so that it fits in place securely, and tighten the two screws.
Replacing Consumables
58