User`s guide

71
Maintenance
Appendix
Resetting the lamp operating time
The lamp operating time must always be reset after the lamp has been replaced with a new one.
The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative
operating time reaches a certain point, it causes the replacement warning message to be displayed.
Never disassemble or modify the lamp.
• Install the lamp and the lamp cover securely. The projector will not turn on if the lamp
or the lamp cover is not installed correctly.
• This product includes a lamp component that contains mercury (Hg). Please consult
your local regulations regarding disposal or recycling. Do not dispose of it with
normal waste.
Select "Yes" and then press v.
12
Press k to display the
configuration menu.
Press L to turn on the power.
34
Select "Reset Lamp Hours"
from the "Reset" menu.