User`s guide

64
Problem Solving
Reading Problem Mail Notification Function
When the Mail Notification function is set to On and a problem/warning occurs in the projector, the
following e-mail will be sent.
Subject: EPSON Projector
Line 1: The Projector Name where the problem has occurred
Line 2: The IP Address set for the projector where the problem has occurred
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table shows the details that are
given in the message for each item. To deal with problems/warnings, see "Reading the Indicators".
p.54
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-) : A projector problem has been dealt with
Message Cause
No-signal
No Signal
No Signal is input to the projector. Check the connection status
or check that the power for the signal source is turned on.
Internal error Internal Error
Fan related error Fan Error
Sensor error Sensor Error
Auto Iris Error Auto Iris Error
Cinema Filter Error Cinema Filter Error
Power Err. (Ballast) Power Err. (Ballast)
Lamp timer failure Lamp Failure
Lamp out Lamp Error
Lamp replacement notification Replace Lamp
High Temp Warning High Temp Warning
Lens Iris Warning Lens Iris Warning
Cinema Filter Warn Cinema Filter Warn.