User Manual

Projector Feature Settings - Operation Menu
81
Settings on the Operation menu let you customize various projector features.
Setting Options Description
Direct Power On On
Off
Set to On to turn on the projector by
plugging it in without pressing the power
button.
Sleep Mode On
Off
Set to On to automatically turns off the
projector after an interval of inactivity.
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode.
Standby Mode Communication
On
Communication
Off
Set to Communication On to allow
monitoring and controlling the projector
over a network when the projector is in
standby mode.
Indicators On
Off
Set to Off to turn off the indicator lights
on the projector except when an error or
warning occurs.
Setting Options Description
Trigger Out
(EH‑LS12000B)
Off
Power
Anamorphic Wide
Outputs a DC 12V signal at 200 mA
maximum from the 3.5 mm mini-jack
Trigger Out port whenever the projector
is turned on.
If you select Anamorphic Wide, voltage
is only output from the Trigger Out port
when the Aspect setting is set to
Anamorphic Wide or Horiz.Squeeze.
Trigger Out
(EH‑LS11000W)
On
Off
Outputs a DC 12V signal at 200 mA
maximum from the 3.5 mm mini-jack
Trigger Out port whenever the projector
is turned on.
Inv Direction
Button
On
Off
When suspending the projector from a
ceiling, set to On to invert the operation
direction of the control panel arrow
buttons.
Reset Operation
Settings
— Resets all adjustment values on the
Operation menu to their default settings.
gg Related Links
• "Turning On the Projector" p.31