User Manual

Image Shape
41
You see the Geometry Correction screen.
e
Select Point Correction and press [Enter]. Then select Yes and press
[Enter] if necessary.
f
Select Point Correction and press [Enter].
a
For fine tuning, select Quick Corner to correct the shape and
size of an image roughly, and then select Point Correction to
adjust them precisely.
g
Select the point number and press [Enter].
You see the grid on the projected image.
a
If you want to change the grid color for visibility, press [Esc],
then select a different Pattern Color setting in the Point
Correction menu.
h
Use the arrow buttons to move to the point you want to correct, then
press [Enter].
i
Use the arrow buttons to correct distortion as necessary.
j
To correct any remaining points, press [Esc] to return to the previous
screen, then repeat steps 8 and 9.
k
When you are finished, press [Esc].
a
• To reset the Point Correction settings to their original positions,
select Reset on the Point Correction screen.
gg Related Links
• "Correcting the Image Shape with Quick Corner" p.38