User Manual
Table Of Contents
- Notations Used in This Guide
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Displaying a Test Pattern
- Projection Modes
- Adjusting the Image Position Using Lens Shift
- Adjusting the Projector's Tilt
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Selecting an Image Source
- Image Aspect Ratio
- Color Mode
- Adjusting the Image Quality
- Adjusting the Image Color
- Adjusting Projector Features
- Monitoring and Controlling the Projector
- Adjusting the Menu Settings
- Using the Projector's Menus
- Using the Displayed Keyboard
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Projector Installation Settings - Installation Menu
- Projector Display Settings - Display Menu
- Projector Feature Settings - Operation Menu
- Projector Administration Settings - Management Menu
- Projector Network Settings - Network Menu
- Image Quality Memory Settings - Memory Menu
- Projector Initial Settings and Reset Options - Initial/All Settings Menu
- Copying Menu Settings Between Projectors (Batch Setup)
- Maintaining the Projector
- Solving Problems
- Appendix
- Optional Accessories and Replacement Parts
- Screen Size and Projection Distance
- Supported Monitor Display Resolutions
- Projector Specifications
- External Dimensions
- List of Safety Symbols and Instructions
- Laser Safety Information
- Glossary
- Notices
- FCC Compliance Statement
- Indication of the manufacturer and the importer in accordance with requirements of EU directive
- Indication of the manufacturer and the importer in accordance with requirements of United Kingdom directive
- Restriction of Use
- Operating System References
- Trademarks
- Copyright Notice
- Copyright Attribution
Projector Connections
23
gg Related Links
• "Connecting to an eARC/ARC Compatible AV System or External Speakers"
p.23
• "Connecting to a Trigger Out Port" p.23
Connecting to an eARC/ARC Compatible AV System or External
Speakers
If your AV system or speakers, such as a sound bar, has an HDMI port, you
can connect them to the projector using an HDMI cable (with Ethernet) to
output audio to these devices.
a
• When the AV System is connected to the projector, set HDMI Link
to On.
s Signal I/O > HDMI Link > HDMI Link
• See the Supplemental A/V Support Specification for eARC/ARC audio
supported formats.
a
Connect the HDMI cable to your AV system's or speakers' HDMI
output port (eARC/ARC compatible).
b
Connect the other end to the projector's HDMI2 (eARC/ARC) port.
c
Make any necessary settings on the connected AV system. See your
device's documentation for more information.
gg Related Links
• "Getting the Latest Version of the Documents" p.7
Connecting to a Trigger Out Port
You can connect your projector to external devices such as motorized screens
that support a trigger signal. When active, a 12V (200 mA maximum) signal is
sent to the connected device while the projector is powered on.
a
Connect a 3.5 mm stereo mini-jack cable to the external device's trigger
port. See the documentation supplied with the device for more
information.
b
Connect the other end to the projector's Trigger Out port.
c
Set the Trigger Out setting in the projector's Operation menu.