User Manual
Table Of Contents
- Notations Used in This Guide
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Displaying a Test Pattern
- Projection Modes
- Adjusting the Image Position Using Lens Shift
- Adjusting the Projector's Tilt
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Selecting an Image Source
- Image Aspect Ratio
- Color Mode
- Adjusting the Image Quality
- Adjusting the Image Color
- Adjusting Projector Features
- Monitoring and Controlling the Projector
- Adjusting the Menu Settings
- Using the Projector's Menus
- Using the Displayed Keyboard
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Projector Installation Settings - Installation Menu
- Projector Display Settings - Display Menu
- Projector Feature Settings - Operation Menu
- Projector Administration Settings - Management Menu
- Projector Network Settings - Network Menu
- Image Quality Memory Settings - Memory Menu
- Projector Initial Settings and Reset Options - Initial/All Settings Menu
- Copying Menu Settings Between Projectors (Batch Setup)
- Maintaining the Projector
- Solving Problems
- Appendix
- Optional Accessories and Replacement Parts
- Screen Size and Projection Distance
- Supported Monitor Display Resolutions
- Projector Specifications
- External Dimensions
- List of Safety Symbols and Instructions
- Laser Safety Information
- Glossary
- Notices
- FCC Compliance Statement
- Indication of the manufacturer and the importer in accordance with requirements of EU directive
- Indication of the manufacturer and the importer in accordance with requirements of United Kingdom directive
- Restriction of Use
- Operating System References
- Trademarks
- Copyright Notice
- Copyright Attribution
Installing the Safety Wire
18
You can install the safety wire to prevent the projector from falling from the
ceiling.
Warning
Be sure to use the safety wire provided with the Epson ceiling mount. The safety
wire is available as an optional Safety Wire Set ELPWR01.
gg Related Links
• "When Using the Ceiling Mount ELPMB22" p.18
• "When Using the Ceiling Mount ELPMB30" p.19
When Using the Ceiling Mount ELPMB22
You can attach a safety wire to your projector for increased safety as shown.
Before you start, make sure you have firmly installed the ELPMB22 ceiling
mount on the projector and have the following items that are included in the
safety wire set:
• Safety wire × 1
• Carabiner × 2
• Wire clamp × 1
• Attaching screw (M4 × 10 mm) × 1
a
For details on installing the ELPMB22, see the Ceiling Mount
ELPMB22/ELPMB23 Instruction Manual.
a
Attach a carabiner to the hole on the ceiling mount, and tighten the
carabiner lock.
b
Attach the wire clamp to another carabiner, and then use the screw to
fix the wire clamp to the wire clamp fixing point on the projector.