User Manual

Projector Specifications
124
Product name EH‑LS12000B/EH‑LS11000W
Dimensions 520 (W) × 169 (H) × 447 (D) mm (not including raised
section)
LCD panel size 0.74"
Display method Poly-silicon TFT active matrix
Resolution 2,073,600 pixels
Full HD (1,920 (W) × 1,080 (H) dots) × 3
Focus adjustment Powered
Zoom adjustment 1.0 to 2.1 (Optical Zoom)
Lens Shift Powered
Maximum vertical direction: Approx. ±96.3%
Maximum horizontal direction: Approx. ±47.1%
Light source Laser diode
Light source output power EH‑‑LS12000B:
Up to 80 W
EH‑‑LS11000W:
Up to 72 W
Wavelength 449 to 461 nm
Laser class Class 4
Light source operation
time *
Up to about 20,000 hours
Speaker N/A
Power supply EH‑‑LS12000B:
100-240V AC±10% 50/60Hz 3.2 - 1.5 A
EH‑‑LS11000W:
100-240V AC±10% 50/60Hz 3.2 - 1.5 A
Operating power
consumption (100 to 120
V area)
311 W
Operating power
consumption (220 to 240
V area)
302 W
Standby power
consumption
Communication On: 2.0 W
Communication Off: 0.4 W
Operating altitude Altitude 0 to 3,048 m
Operating temperature ** Altitude of 0 to 2,286 m: +5 to +35°C (Humidity of 20
to 80%, No condensation)
Altitude of 2,287 to 3,048 m: +5 to +30°C (Humidity of
20 to 80%, No condensation)
Storage temperature -10 to +60°C (Humidity of 10 to 90%, No condensation)
Mass Approx. 12.7 kg
* Approximate time until the light source brightness decreases to half of its
original value. (Assuming the projector is being used in an environment
containing airborne particles of 0.04 to 0.2 mg/m3. This is an approximate
guide only and may change depending on the projector’s usage and
surroundings.)
** Light source brightness automatically dims if the surrounding temperature
gets too high. (Approximately 35°C at an altitude of 0 to 2,286 m, and
approximately 30°C at an altitude of 2,287 to 3,048 m; however, this may vary
depending on the surrounding environment.)
This product is also designed for IT power distribution system with phase-to-
phase voltage 230V.
Angle of tilt
If you use the projector tilted at an angle greater than the one shown in the
following illustration, it could be damaged and cause an accident.