User Manual

Projector Indicator Status
107
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
a
• If the indicators display a pattern not listed in the table below, turn
the projector off, unplug it, and contact Epson for help.
• When the Indicators setting is set to Off in the projector's
Operation menu, all indicators are off under normal projection
conditions.
A
Status indicator
B
Laser indicator
C
Temp (temperature) indicator
D
On/Standby (power) indicator
Projector status
Indicator and status Problem and solutions
Power: Lit blue
Status: Lit blue
Laser: Off
Temp: Off
Normal operation.
Power: Lit blue
Status: Flashing blue
Laser: Off
Temp: Off
Warming up, shutting down, or cooling down.
When warming up, wait about 30 seconds for an image
to appear.
All buttons are disabled during warm-up, shutting
down, and cooling down.
Power: Off
Status: Off
Laser: Off
Temp: Off
Standby or sleep mode.
When you press the power button, projection starts.
Power: Flashing blue
Status: Off
Laser: Off
Temp: Off
Preparing for monitoring and all features are disabled.
Power: Lit blue
Status: Off
Laser: Off
Temp: Off
Monitoring.
Power: Flashing blue
Status: Indicator status
varies
Laser: Indicator status
varies
Temp: Flashing orange
Projector is too hot.
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental temperature is not too
hot.