User Manual
Table Of Contents
- Notations Used in This Guide
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Displaying a Test Pattern
- Projection Modes
- Adjusting the Image Position Using Lens Shift
- Adjusting the Projector's Tilt
- Image Shape
- Resizing the Image with the Zoom Feature
- Focusing the Image with the Lens Button
- Selecting an Image Source
- Image Aspect Ratio
- Color Mode
- Adjusting the Image Quality
- Adjusting the Image Color
- Adjusting Projector Features
- Monitoring and Controlling the Projector
- Adjusting the Menu Settings
- Using the Projector's Menus
- Using the Displayed Keyboard
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal I/O Menu
- Projector Installation Settings - Installation Menu
- Projector Display Settings - Display Menu
- Projector Feature Settings - Operation Menu
- Projector Administration Settings - Management Menu
- Projector Network Settings - Network Menu
- Image Quality Memory Settings - Memory Menu
- Projector Initial Settings and Reset Options - Initial/All Settings Menu
- Copying Menu Settings Between Projectors (Batch Setup)
- Maintaining the Projector
- Solving Problems
- Appendix
- Optional Accessories and Replacement Parts
- Screen Size and Projection Distance
- Supported Monitor Display Resolutions
- Projector Specifications
- External Dimensions
- List of Safety Symbols and Instructions
- Laser Safety Information
- Glossary
- Notices
- FCC Compliance Statement
- Indication of the manufacturer and the importer in accordance with requirements of EU directive
- Indication of the manufacturer and the importer in accordance with requirements of United Kingdom directive
- Restriction of Use
- Operating System References
- Trademarks
- Copyright Notice
- Copyright Attribution
Updating the Firmware
102
When you select the Firmware Update option in the projector's Initial/All
Settings menu, the projector enters firmware update mode and is ready to
perform a firmware update using the USB-A or Service port.
gg Related Links
• "Updating Firmware Using a USB Storage Device" p.102
• "Updating Firmware Using a Computer and USB Cable" p.103
Updating Firmware Using a USB Storage Device
You can update the projector's firmware using a USB storage device.
a
Responsibility for updating the firmware lies with the customer. If a
firmware update fails due to problems such as a power failure or
communication problems, a fee will be charged for any necessary
repairs.
a
Download the projector firmware file from the Epson Web site.
b
Copy the downloaded firmware file to the root folder (highest folder in
the hierarchy) of the USB storage device.
a
• The USB storage device must be formatted in FAT format.
• Do not copy any other files to the USB storage device.
• Do not change the firmware's file name. If the file name is
changed, the firmware update will not start.
• Check that the firmware file you copied is the correct file for
your projector model. If the firmware file is not correct, the
firmware update will not start.
c
Connect the USB storage device to the projector's USB-A port.
a
Connect the USB storage device directly to the projector. If the
USB storage device is connected using a USB hub, the firmware
update may not be applied correctly.
d
Press the [Menu] button, select the Initial/All Settings menu, and press
[Enter].
e
Select Firmware Update and press [Enter].
f
Select Yes to start the firmware update.
a
• Do not disconnect the power cord from the projector while the
firmware is updating. If the power cord is disconnected, the
projector may not start correctly.
• Do not disconnect the USB storage device from the projector
while the firmware is updating. If the USB storage device is
disconnected, the update may not be applied correctly.
All of the projector's indicators start flashing and the firmware update
starts. When the update finishes normally, the projector enters standby
status (only the power indicator is lit blue). If Direct Power On is set to