User’s Guide
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents 3 Notations Used in This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction Limitation of the Number of the Target Projectors when Using Multiple Projectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Projector Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Ease of use when installed on a ceiling mount. . . . . . . . . . . . . . . . . . . . . . . Reliablity you can depend on. . . . . .
Contents 4 Soft keyboard operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wireless LAN Menu (only when the optional wireless LAN unit is installed). . . . Security menu (Only available when the optional wireless LAN unit is installed) .... .. ...... ..... ..... .. ...... ..... ...... .. ..... ...... . Wired LAN Menu. . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5 Reading Problem Mail Notification Function. . . . . . . . . . . . . . . . . 110 ESC/VP21 Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Command List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Layouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This chapter explains the projector's features and the part names.
Projector Features Ease of use when installed on a ceiling mount Centered lens The lens is positioned in the center of the projector so it is well balanced and is easy to mount on a ceiling. This also makes it easy to line up the screen and the projector. Equipped with electric lens shift, zoom and focus functions Using the lens shift function that allows you to adjust the position of the projected image along the horizontal and vertical axis opens up a wide variety of installation locations.
Projector Features Reliablity you can depend on The projector is equipped with two lamps. Even if one of the lamps breaks, you can continue projecting with the other lamp and avoid disrupting important presentations. 8 Enhanced security functions Password Protect to restrict and manage users By setting a Password you can restrict who can use the projector. s p.37 Control Panel Lock restricts button operation on the Control panel.
Projector Features efficient and varied presentations and meetings. s Projector Operation Guide Connect to the projector from computers via a network You can use your existing network to share the projector from multiple computers. Documents can be projected from each computer without having to change any cables during meetings or presentations. Also, you don't have to worry about the distance between the computer and the projector.
Part Names and Functions 10 Name Front/Top The illustration shows the projector with a standard zoom lens installed. Name A Handle Function Use these handles when carrying the projector. Also, you can pass an anti-theft wire lock through the handles to secure the projector. s p.41 Caution Do not carry the projector by one person. Two people are needed to unpack or carry the projector.
Part Names and Functions 11 Name Interface E Cable holder Connection may become defective when a thick heavy HDMI cable is connected to the HDMI input port. Run a commercially available cable tie through this holder to prevent the cable from disconnecting. F Computer input port For analog RGB signals from a computer and component video signals from other video sources. s Quick Start Guide G Power inlet Connects to the power cable.
Part Names and Functions 12 Name Rear Name A Air exhaust vent (Lamp cover) Function Exhaust vent for air used to cool the projector internally. Also, open this cover to replace the projector's lamps. Function E Status indicators The color of the indicators and whether they are flashing or lit indicate the status of the projector. The left illustration indicates EB-Z8050W. EB-Z8000WU has no Wireless indicator. s p.71 F [/ ] button Corrects horizontal Keystone distortion.
Part Names and Functions Name N [t] button 13 Function Turns the projector power On or Off.
Part Names and Functions Name 14 Function A [t] button Turns the projector power On or Off. s Quick Start Guide B [Computer] button Changes to images from the Computer input port. s p.22 C [BNC] button Changes to images from the BNC input port. s p.22 D [Video] button Changes to images from the Video input port. s p.22 E [S-Video] button Changes to images from the S-Video input port. s p.22 F [Menu] button Displays and closes the configuration menu. s p.
Part Names and Functions Name 15 Function Z [User] button Press to assign a frequently used item from the six available configuration menu items. By pressing the button the assigned menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. s p.48 Test Pattern is assigned as the default setting. a [LAN] button Changes to images of EasyMP Network Projection. (EB-Z8050W only) s p.22 This button does not function when using EB-Z8000WU.
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.
Correcting Distortion in the Projected Image There are two methods of correcting distortion in projected images as below. • Quick Corner This allows you to manually correct each of the four corners of the projected image separately. s p.18 We recommend using Quick Corner to accurately adjust keystone distortion. • H/V-Keystone This allows you to manually correct distortion in the horizontal and vertical directions independently.
Correcting Distortion in the Projected Image 18 Correcting Distortion with Quick Corner Procedure A Press the [Menu] button, and then from the configuration menu select Settings - Keystone. s "Using the Configuration Menu" Using the Remote Control Using the Control panel C Use the [h] button on the remote control or the [w/ ], [v/ ], [/ ] buttons on the control panel to select the corner you want to adjust, and then press the [Enter] button.
Correcting Distortion in the Projected Image D To adjust the shape, use the [h] button on the remote control or the [w/ the control panel. ], [v/ ], [/ ] buttons on 19 E Repeat procedures 3 and 4 as needed to adjust any remaining corners. F When you are done, press the [Esc] button to exit the correction menu.
Correcting Distortion in the Projected Image q If the [Esc] button is held down for about two seconds while correcting with Quick Corner, the following screen is displayed. Reset Quick Corner: Resets the result of Quick Corner corrections. Switch to H/V-Keystone: Switches the correction method to H/ V-Keystone. s p.
Changing the Projected Image You can change the projected image in the following two ways. • Changing by Source Search The projector automatically detects signals being input from connected equipment, and the image being input from the equipment is projected. • Changing directly to the target image You can use the remote control buttons to change to the target input port.
Changing the Projected Image q The following screen showing the status of image signals is displayed when only the image that the projector is currently displaying is available, or when no image signal can be found. You can select the input port where the equipment you want to use is connected. If no operation is performed after about 10 seconds, the screen closes.
Functions for Enhancing Projection Selecting the Projection Quality (Selecting Color Mode) 23 Procedure Remote Control You can easily obtain the optimum image quality simply by selecting the setting that best corresponds to your surroundings when projecting. The brightness of the image varies depending on the mode selected. Mode Application Dynamic Ideal for use in a bright room. This is the brightest mode. Presentation Ideal for making presentations using color materials in a bright room.
Functions for Enhancing Projection 24 Setting the Auto Iris By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. Procedure A Press the [Menu] button, and select Image - Auto Iris from Procedure the configuration menu. s "Using the Configuration Menu" Using the Remote Control Using the Control panel B Select On. Using the Remote Control Each time you press the buttons, the electric shutter closes or opens.
Functions for Enhancing Projection a still photo. Also, you can perform operations such as changing between files during presentations from a computer without projecting any images if the freeze function is activated beforehand. Procedure Remote Control 25 Changing the Aspect Ratio Change the Aspect Ratiog when video equipment is connected so that images that have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Functions for Enhancing Projection A B C D E Normal 16:9 Full Zoom Native 26
Functions for Enhancing Projection 27 Changing the Aspect for computer images You can change the aspect of projected images input from the Computer, BNC, DVI-D, or HDMI input port as follows. The original aspect ratio is 16:10 because of the wide panel mounted on the projector. When projecting onto 16:9 screens, set the Aspect to 16:9. Set Values Operation Normal (When the input source is a Computer, DVI-D, or BNC) Projects to the full projection size retaining the Aspect of the input image.
Functions for Enhancing Projection Set Values 28 Operation Projection example Full Project at full size. When a 1024x768 signal is input Zoom Projects the input image enlarged to the full lateral direction size as the aspect ratio remains. Parts that extend beyond the projection size are not projected.
Functions for Enhancing Projection Set Values Native q 29 Operation Projects at the resolution of the input image size to the center of the screen. This is ideal for projecting clear images. If the image resolution exceeds the panel resolution of your projector, the edges of the image are not projected.
Functions for Enhancing Projection Pointer Function (Pointer) 30 B Move the Pointer icon ( Remote Control This allows you to move a Pointer icon on the projected image, and helps you draw attention to the area you are talking about. q Procedure A Display the Pointer. Remote Control Each time you press the button, the pointer appears or disappears. ). You can choose from three different kinds of Pointer icon ( , or menu. s p.
Functions for Enhancing Projection Enlarging Part of the Image (E-Zoom) 31 B Move the ( ) to the area of the image that you want to enlarge. This is useful when you want to expand images to see them in greater detail, such as graphs and tables. Remote Control C Enlarge. Procedure Remote Control A Start E-Zoom. Remote Control Each time the button is pressed, the area is expanded. You can expand quickly by holding the button down. You can reduce the enlarged image by pressing the [x] button.
Limitation of the Number of the Target Projectors when Using Multiple Projectors When an ID is set for the projector and the remote control, you can use the remote control to operate only the projector with a matching ID. This is very useful when managing multiple projectors. Operation Possible Combinations Projector ID: 1 You can set an ID for the projector within a range of "1" to "9". The default value is Off. You can set an ID for the remote control within a range of "0" to "9".
Limitation of the Number of the Target Projectors when Using Multiple Projectors Setting the Projector ID Checking the Projector ID Use the following procedure to check the projector ID. Procedure A During projection, press the [Menu] button and select Extended - "Projector ID" from the configuration menu. s "Using the Configuration Menu" Using the Remote Control 33 Procedure A Set the remote control ID switch to On.
Limitation of the Number of the Target Projectors when Using Multiple Projectors Setting the Remote Control ID Procedure A Set the remote control ID switch to On. B While holding the [ID] button, press a number button to select a number to match the ID of the projector you want to operate. Once this setting has been made, the projector that can be operated by the remote control is limited. q 34 The remote control ID setting is saved in the remote control.
Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) When multiple projectors are lined up and projecting images, you can manually correct the brightness and color tone of each projector's image so that the colors projected from each projector match closely. Use the multi-screen color adjustment function when the Color Mode of each projector is set to the same item. In some cases the brightness and color tone may not match completely even after correction.
Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment) image, you can check the correction results and make corrections in the actual image. F Repeat procedures 3 to 5 until corrections are finished. G When all corrections are finished, press the [Menu] button to close the configuration menu.
Security Functions The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock/Lens Operation Lock You can prevent people changing the settings on the projector without permission. s p.39 • Anti-Theft Lock The projector is equipped with various types of anti-theft security devices. s p.
Security Functions q 38 Remote Control • If Password Protect is already activated, you must enter the Password. If the Password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" • When the Password is set, stick the Password protect sticker in a visible position on the projector as a further theft deterrent. B Turn on Power On Protect. (1) (2) (3) Select Power On Protect, and then press the [Enter] button. Select On, and then press the [Enter] button.
Security Functions Attention • If an incorrect Password is entered three times in succession, the message "The projector's operation will be locked." is displayed for about five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on. The projector displays the Password entry screen again so that you can enter the correct Password.
Security Functions 40 Lens Operation Lock This function locks the following buttons on the remote control related to the lens operation. Remote Control B Select either Full Lock or Partial Lock according to your purpose. Procedure C Select Yes when the confirmation message is displayed. The Control panel buttons are locked according to the setting you chose. q You can release the Control panel lock by one of the following two methods.
Security Functions 41 Anti-Theft Lock As the projector is often setup on ceiling mounts and left in rooms unattended, the projector includes the following security devices to prevent someone from taking the projector. B Select "On". The buttons related to the lens operation are locked according to the setting you chose. • Security slot The Security slot is compatible with the Microsaver Security System manufactured by Kensington.
Configuration Menu This chapter explains how to use the configuration menu and its functions.
Using the Configuration Menu Selecting from the top menu 43 Selecting from the sub menu Changing the selected item Exit
List of Functions 44 Image Menu Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Analog/Digital Component Videog/ Composite video g/S-Videog Analog RGB/Digital RGB Sub Menu Function Color Mode You can select the quality of the image to suit your surroundings. s p.23 Brightness You can adjust the image Brightness.
List of Functions Sub Menu 45 Function Color Adjustment (This item cannot be selected if sRGBg is selected as the Color Mode setting from the Image menu.) You can make adjustments by choosing one of the following. Red, Green, Blue: You can adjust the saturation of each color individually. (This item cannot be displayed if Customized is selected as the Color Mode setting from the Image Menu.
List of Functions 46 Signal Menu Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each image signal. Analog RGB Sub Menu Digital RGB/ Digital Component Video g Analog Component Video Composite videog/S-Videog Function Auto Setup You can select whether or not (On/Off) Auto Setup automatically adjusts the image to the optimum state when the Input Signal changes. s p.
List of Functions 47 Sub Menu Function Noise Reduction (This cannot be set when a digital RGB signal is input) Smoothes out rough images. There are two modes. Select your favorite setting. It is recommended that this is set to Off when viewing image sources in which noise is very low, such as for DVDs.
List of Functions 48 Settings Menu Sub Menu Keystone Function You can correct keystone distortion. H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. Use the [w/ ], [v/ ], [/ ] buttons on the control panel to perform similar corrections to V-Keystone and H-Keystone. Quick Corner: Selects and corrects the four corners of the projected image. s p.
List of Functions Sub Menu 49 Function Test Pattern When the projector is setup, a Test Pattern is displayed so that you can adjust the projection without connecting other equipment. While the Test Pattern is displayed, zoom, focus adjustments, and Keystone correction can be performed. To cancel the Test Pattern, press the [ESC] button on the Remote Control or the Control panel. Reset You can reset all adjustment values on the Settings menu to their default settings, except for User Button.
List of Functions Sub Menu 50 Function Direction You can set from the following according to the way the projector is set up. s p.84 Normal, Pointing Up, Pointing Down Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On. Be careful when this item is set to On because this unit turns on at the time of power recovery with this unit plugged-in to an outlet.
List of Functions 51 Sub Menu Function Language You can set the Language for message displays. Reset You can reset Display*1, Operation*2, and Air Filter Notice from the Extended menu to their default settings. To return all menu items to their default settings, see s p.68 *1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo Protect to Off.s p.
List of Functions Sub Menu 52 Function Wired LAN You can make network settings. DHCP: You can set whether or not (On/Off) to use DHCP. If this is set to On you cannot set any more addresses. IP Address: You can input the IP address assigned to the projector.* You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used. 0.0.0.0, 0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 53 Sub Menu Function Mail When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent email, s "Reading Problem Mail Notification Function" p.110 Mail Notification: You can set whether or not (On/Off) to be notified by e-mail. If this is set to Off you cannot set any more addresses. SMTP Server: You can input the IP address for the SMTP server for the projector.
List of Functions 54 Network Menu (EB-Z8050W only) When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting Network Protect to Off. s p.37 Sub Menu Network Configuration q Function The following menus are available for setting network items. Basic, Wireless LAN, Security, Wired LAN, Mail, Others, Reset and Setup complete.
List of Functions 55 Notes on operating the network menu Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the configuration menu. When done, make sure you go to the Setup complete, and select one of Yes, No, or Cancel. When you select Yes or No, you return to the configuration menu. Yes: No: Cancel: Saves the settings and exits the Network menu. Exits to the Network menu without saving the settings. Continues displaying the Network menu.
List of Functions 56 A Each time this key is selected, it sets and changes between upper case and lower case letters. B Each time this key is selected, it sets and changes the symbol keys for the section enclosed by the frame. Basic Menu Sub Menu Function Projector Name Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanumeric characters.
List of Functions 57 Sub Menu Function Web Control Password Set a password to use when making settings and controlling the projector using Web Control. You can enter up to 8 single-byte alphanumeric characters. Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer connected on a network.
List of Functions 58 Sub Menu Function DHCP You can set whether or not (On/Off) to use DHCPg. If this is set to On you cannot set any more addresses. IP Address You can input the IP addressg assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) Subnet Mask You can input the Subnet Maskg for the projector.
List of Functions 59 Security menu (Only available when the optional wireless LAN unit is installed) When the optional wireless LAN unit is installed and being used in Manual Mode, it is strongly recommended that you set security. Sub Menu Function Select one of the following security methods. When setting up security, follow the instructions from the administrator of the network system you are about to access.
List of Functions 60 System Authentication PEAP/EAP-GTC User name, Password LEAP User name, Password EAP-Fast/MS-CHAPv2 User name, Password EAP-Fast/GTC User name, Password q • If using EAP, you need to make settings at the projector that match the authentication server settings. Check with your network administrator for details on RADIUS settings. • Open “Network Menu” – “Certificate” in “Web Control” to register a digital certificate and a CA certificate to the projector.
List of Functions 61 Sub Menu Function Format You can set the input method for the WEP encrypted key. ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the network administrator for the network in which the projector participates, and then set to "ASCII". HEX: Input in hexadecimal. Key ID Selects the WEP encryption ID key.
List of Functions 62 The following items can be set. Sub Menu PSK (Encryption key) Function You can enter a Pre-Shared Key (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. When the PreShared Key is entered and the [Enter] button is pressed, the value is set and displayed as an asterisk (*). You cannot enter more than 32 characters on the configuration menu. When setting from Web Control, you can enter more than 32 characters.
List of Functions 63 Wired LAN Menu Sub Menu Function DHCP You can set whether or not (On/Off) to use DHCPg. If this is set to On you cannot set any more addresses. IP Address You can input the IP addressg assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) Subnet Mask You can input the Subnet Maskg for the projector.
List of Functions 64 Mail Menu When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent e-mail, s p.110 Sub Menu Function Mail Notification You can set whether or not (On/Off) to be notified by e-mail. SMTP Server You can input the IP addressg for the SMTP server for the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.
List of Functions 65 Others Menu Sub Menu Function Trap IP Address 1/Trap IP Address 2 You can register up to two for the SNMPg trap notification destination. You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255) To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a network administrator.
List of Functions 66 Reset Menu Resets all of the network settings. Sub Menu Reset network settings. Function To reset all of the network settings, select Yes. After you reset all the settings, the Basic menu appears.
List of Functions 67 Info Menu (Display Only) Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal being projected as shown in the following screen shots. Composite video g/S-Videog Analog RGB/Digital RGB/ Component Videog/Digital Component Video Sub Menu Function Lamp Hours You can display the cumulative lamp operating time*.
List of Functions 68 Sub Menu Serial Number * Function Displays the projector's serial number. The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on. Reset Menu Sub Menu Reset All Function You can reset all items in the configuration menu to their default settings. The following items are not reset to their defaults: Input Signal, User's Logo, Multi-screen, all items for Network menus, Lamp Hours, and Language.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.
Using the Help If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the [Help] button. You can solve problems by answering the questions. 70 C Confirm the selection. Remote Control Procedure A Press the [Help] button. The Help screen is displayed. Remote Control Questions and solutions are displayed as shown on the screen below. Press the [Help] button to exit Help. B Select a menu item.
Problem Solving 71 If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help". s p.75 Reading the Indicators These indicators indicate the operating status of the projector. A Indicates the operating status. Standby condition When the [t] button is pressed in this condition, projection starts.
Problem Solving 72 E Indicates the projection lamp status. Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cable is connected correctly and that the power is being supplied normally. Sometimes, when the power cable is unplugged, the t indicator remains lit for a short period, but this is not a fault.
Problem Solving 73 Status Cause Remedy or Status If it is cracked: Replace it with a new lamp, or contact your local dealer for further advice. If replacing the lamp yourself, be careful to avoid pieces of broken glass (you cannot continue projecting until the lamp is replaced). s Epson Projector Contact List When using at an altitude of 1500 m or more, set High Altitude Mode to On. s p.49 Set Direction to Pointing Down or Pointing Up when the projector is installed to project downward or upward. s p.
Problem Solving Status 74 Cause Remedy or Status If it is not cracked: Re-fit the lamp and turn on the power. If the error continues: Replace the lamp with a new lamp and turn on the power. If the error continues: Stop using the projector, disconnect the power cable from the electrical outlet, and contact your local dealer or the nearest address provided in the Support and Service Guide.
Problem Solving When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems relating to images • "No images appear" s p.76 Projection does not start, the projection area is completely black, the projection area is completely blue, and so on. • "Moving images are not displayed" s p.76 Moving images being projected from a computer appear black and nothing is projected.
Problem Solving 76 Problems relating to images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly. s Quick Start Guide Check that your electrical outlet or power source is functioning correctly. Is Shutter active? Press the [Shutter] button on the Remote Control to cancel Shutter. s p.
Problem Solving 77 The message "Not supported" is displayed. Check Is the image signal format setting correct? Remedy Change the setting according to the signal for the connected equipment. s Signal Menu - Video Signal p.46 Only when projecting images from a video source Do the image signal Resolution and the Refresh Rate correspond to the mode? Refer to the computer's documentation for how to change the image signal Resolution and the Refresh Rate output from the computer.
Problem Solving 78 Check Has condensation formed on the lens? Remedy If the projector is suddenly taken from a cold environment to a warm environment, or if sudden ambient temperature changes occur, condensation may form on the surface of the lens, and this may cause the images to appear fuzzy. Set the projector up in the room about one hour before it is used. If condensation forms on the lens, turn the projector off and wait for the condensation to disappear.
Problem Solving 79 Check Is the computer set for dual display? Only when projecting computer images Is the correct resolution selected? Only when projecting computer images Remedy If dual display is activated in the "Display Properties" of the computer's Control panel, only about half of the image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
Problem Solving 80 Problems when projection starts No power supplied Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Disconnect and then reconnect the power cable. s Quick Start Guide Check that your electrical outlet or power source is functioning correctly.
Problem Solving 81 Other problems The Remote Control does not work Check Remedy Is the remote control light-emitting area pointing towards the remote receiver on the projector when it is operated? Point the remote control towards the Remote Receiver. Operating range s Quick Start Guide Is the remote control too far from the projector? The operating range for the remote control is about 15 m.
Problem Solving 82 Mail is not received even if a problem occurs in the projector Check Remedy Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from the configuration menu. s Extended Menu - Standby Mode p.49 Did a fatal abnormality occur and the projector come to a sudden stop? When the projector comes to a sudden stop, e-mail cannot be sent.
Appendix This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Installation Methods The projector can be mounted on a ceiling or placed on a desk as shown below. Also, this projector can project images to various places because it can project images vertically or horizontally at each 90˚ angle. 84 • Suspend the projector from the ceiling and project images from in front of a screen. • Suspend the projector from the ceiling and project images from behind a translucent screen. • Project images from in front of a screen.
Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Warning Do not use sprays containing a flammable gas to remove dirt or dust which is adhering to parts such as the lens or filter of the projector. This coud be a cause of the fire for the high temperature of lamps inside the unit. 85 Cleaning the Air filter Clean the air filter and the air intake vent when the following message is displayed or the Filter indicator is flashing green.
Cleaning C Remove the air filter. 86 Attention If the air filter is hit too hard, it may become unusable due to deformities and cracks. E Remove any dust remaining on the air filter by using a vacuum cleaner from the front side. D With the front (the side with tabs) of the air filter facing down, tap the air filter four or five times to shake off the dust. Turn it over and tap the other side in the same way. F Replace the air filter.
Cleaning 87 G Replace the air filter cover. Press the cover until it clicks into place. q If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s p.
Replacing Consumables 88 This section explains how to replace the Remote Control batteries, the lamp, and the air filter. Replacing the Remote Control Batteries If delays in the responsiveness of the Remote Control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries. Have two AA size alkaline batteries ready. You cannot use other batteries except for the AA size alkaline.
Replacing Consumables Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The message "Replace the lamp." is displayed at the lower left of the projection screen when you start projecting. 89 • The projected image gets darker or starts to deteriorate. Attention • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the projected images. s p.
Replacing Consumables Caution Wait until the lamps have cooled down sufficiently before removing the lamp cover. If the lamp is still hot, burns or other injuries may result. It takes about one hour after the power has been turned off for the lamp to be cool enough. 90 C Pull up the lock lever for the lamp you want to replace and pull the lamp straight out. If the lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice.
Replacing Consumables 91 Attention • Make sure you install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the lamp does not turn on. • This product includes a lamp component that contains mercury (Hg). Please consult your local regulations regarding disposal or recycling. Do not dispose of it with normal waste.
Replacing Consumables 92 Replacing the Air Filter Air filter replacement period It is time to replace the air filter when: • The air filter has turned brown. • The message is displayed even though the air filter has been cleaned. How to replace the air filter The air filter can be replaced even when the projector is suspended from a ceiling. C Remove the air filter. Procedure A After you turn off the projector's power and the confirmation buzzer beeps twice, disconnect the power cable.
Replacing Consumables E Replace the air filter cover. Press until it clicks into place. q Dispose of used air filters properly in accordance with your local regulations.
Optional Accessories and Consumables The following optional accessories and consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: 2009.07. Details of accessories are subject to change without notice and availability may vary depending on the country of purchase. Optional accessories Computer cable ELPKC02 (1.
Optional Accessories and Consumables Consumables Replacement lamp unit (two-pack) ELPLP52 Replacement lamp unit (one-pack) ELPLP51 Use as a replacement for used lamps. Air filter ELPAF23 Use as a replacement for used air filters.
Notes on Transportation There are many glass parts and precision components inside the projector. To prevent damage due to impacts when transporting, handle the projector as follows. Moving Nearby Checking the following points, and then carry carefully by the handles. • Turn off the power to the projector and disconnect all cables. • Attach the lens cover to the lens. • Store the foot. Caution Do not carry the projector by one person. Two people are needed to unpack or carry the projector.
Saving a User's Logo 97 You can save the image that is currently being projected as a User's Logo. q When a User's Logo is saved, the previous User's Logo is erased. q Procedure A Project the image you want to use as the User's Logo, and then press the [Menu] button. Using the Remote Control • If User's Logo Protect from Password Protect is set to On, a message is displayed and the user's logo cannot be changed. You can make changes after setting User's Logo Protect to Off. s p.
Saving a User's Logo 98 D Move the box to select the part of the image to use as the User's Logo. F Select the zoom factor from the zoom setting screen. 400% is displayed only when using EB-Z8000WU. G When the message "Save this image as the User's Logo?" is displayed, select "Yes". The image is saved. After the image has been saved, the message "Completed." is displayed. Using the Remote Control Using the Control panel q q You can save at up to 400 ^ 300 dots in size.
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) There are two methods for setting WPS. • Push Button Method SSID and security are set automatically when the [Enter] button is pressed on the projector's control panel and the dedicated button on the access point equipment. This method is recommended when the projector and access point are close together.
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) The Push Button Method screen is displayed. B Press the [Enter] button on the projector's control panel when prompted by the screen. This completes the setup. D Press the [Enter] button or the [Esc] button. It returns to the Wireless LAN menu screen. Then, the Push Button Method screen is displayed. C Press the button on the access point when prompted by the screen. E Select "Yes" from "Setup complete".
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) The PIN Code Method screen is displayed. This completes the setup of the connection between the projector and the access point. Press the [Menu] button to close the configuration menu. B Enter the PIN code displayed on the "PIN Code Method" screen from the computer to the access point, and then select "Start Setup".
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-Z8050W only) C The message "Setup by Wi-Fi Protected Setup complete." is displayed. Press the [Enter] button or the [Esc] button. It returns to the Wireless LAN menu screen. D Select "Yes" from "Setup complete". 102 This completes the setup of the connection between the projector and the access point. Press the [Menu] button to close the configuration menu.
Screen Size and Projection Distance 103 The following table shows the projection distance when a standard zoom lens is attached. When an optional lens is attached, check the projection distances in the User's Guide supplied with optional lenses. To find the appropriate screen size, see the following table to set up the projector. Values are just reference.
Screen Size and Projection Distance 16:10 Screen Size 104 Minimum (Wide) to Maximum (Tele) Vertical lens shift Top to Bottom 16:9 Screen Size Minimum (Wide) to Maximum (Tele) Vertical lens shift Top to Bottom 200" 440x275 755 - 1222 -57 - 326 80" 180x100 301 - 490 -28 - 127 300" 550x344 1137 - 1837 -85 - 489 100" 220x120 378 - 614 -35 - 159 500" 1100x688 1900 - 3067 -142 - 815 120" 270x150 455 - 739 -42 - 191 150" 330x190 571 - 925 -52 - 239 200" 440x250 764 - 1236 -69
Connecting a LAN Cable Connect with a commercially available 100BASE-TX or 10BASE-T LAN cable. The interface may differ from the following illustration depending on the model of your projector. (The following illustration indicates EB-Z8000WU) A To LAN port B LAN cable (commercially available) C To LAN port Attention To prevent malfunctions, use a category 5 shielded LAN cable.
Connecting to an external monitor Analog RGB images input from Computer Input Port or BNC Input Port can be displayed on an external monitor and the screen at the same time. This means that you can check projected images on an external monitor when giving presentations even if you cannot see the screen. Connect using the cable supplied with the external monitor.
Removing and Attaching the Projector Lens Unit Prepare #2 plus-driver in advance. 107 B Remove the front cover. Removing Attention • Only remove the lens unit when necessary. If dust or dirt enter the projector, projection quality deteriorates and it could cause a malfunction. • Try not to touch the lens section with your hand or fingers. If fingerprints or oils are left on the surface of the lens, projection quality deteriorates.
Removing and Attaching the Projector Lens Unit D Pull the lens unit straight out as it is released. Attaching Attention Do not attach the lens unit when the projector's lens insertion section is facing up. Dust or dirt could enter the projector. Procedure A Insert the lens unit straight into the lens insertion section with the white circle on the lens on top. 108 B While holding the lens unit firmly, turn the lock lever clockwise until it is locked. Check that the lens cannot be detached.
Removing and Attaching the Projector Lens Unit 109 A Install the cover along the guide. B Tighten the fixing screws. C Replace the front cover. Attention • Install the front cover to use the projector. • Store the projector with the lens unit installed. If the projector is stored without the lens unit, dust and dirt may get inside the projector and cause malfunctions or lower the quality of projection. A Install the cover along the guide. B Tighten the fixing screw. C Tighten the two fixing screws.
Reading Problem Mail Notification Function When the Mail Notification function is set to On and a problem/ warning occurs in the projector, the following e-mail is sent. Subject: EPSON Projector Line 1: The name of the projector where the problem has occurred Line 2: The IP address set for the projector where the problem has occurred. Line 3 and on: Details of the problem The details of the problem are listed line by line. The following table shows the details that are given in the message for each item.
ESC/VP21 Commands 111 Command List Cable Layouts When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command. If the command being processed terminates abnormally, an error message is output and a ":" is returned.
ESC/VP21 Commands Communications protocol • • • • • Default baud rate setting: 9600 bps Data length: 8 bit Parity: None Stop-bit: 1 bit Flow control: None 112
About PJLink 113 PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA.
Supported Monitor Displays 114 Supported Monitor Displays for EB-Z8000WU Computer signals (analog RGB) Units: dots Signal Refresh Rate (Hz) VGA 60/72/75/85/iMac*1 SVGA Resolution Aspect Mode Normal 16:9 Full Zoom Native 640x480 1600x1200 1920x1080 1920x1200 1920x1200 640x480 56/60/72/75/85/iMac*1 800x600 1600x1200 1920x1080 1920x1200 1920x1200 800x600 XGA 60/70/75/85/iMac*1 1024x768 1600x1200 1920x1080 1920x1200 1920x1200 1024x768 WXGA 60/75/85 1280x768 1920x1152 1920x1
Supported Monitor Displays Signal MAC21” Refresh Rate (Hz) 75 115 Resolution 1152x870 Aspect Mode Normal 16:9 Full Zoom Native 1588x1200 1920x1080 1920x1200 1920x1200 1152x870 *1 Connection is disabled if the equipment does not have a VGA output port. *2 Only compatible when Normal is selected as the Resolution from the configuration menu. *3 Only compatible when VESA CVT-RB(Reduced Blanking) signal is input.
Supported Monitor Displays 116 Input signal from the HDMI/DVI-D input port Units: dots Signal * Refresh Rate (Hz) Resolution Aspect Mode 16:9 Full Zoom Native VGA 60 640x480 1920x1080 1920x1200 1920x1200 640x480 SVGA 60 800x600 1920x1080 1920x1200 1920x1200 800x600 XGA 60 1024x768 1920x1080 1920x1200 1920x1200 1024x768 WXGA 60 1280x800 1920x1080 1920x1200 1920x1200 1280x800 SXGA 60 1280x960 1920x1080 1920x1200 1920x1200 1280x960 60 1280x1024 1920x1080 1920x120
Supported Monitor Displays 117 Supported Monitor Displays for EB-Z8050W Computer signals (analog RGB) Units: dots Signal Refresh Rate (Hz) Resolution Aspect Mode Normal 16:9 Full Zoom Native VGAEGA 70 640x350 1280x700 1280x720 1280x800 1280x700 640x350 VGA 60/72/75/85/iMac*1 640x480 1066x800 1280x720 1280x800 1280x800 640x480 SVGA 56/60/72/75/85/iMac*1 800x600 1066x800 1280x720 1280x800 1280x800 800x600 XGA 60/70/75/85/iMac*1 1024x768 1066x800 1280x720 1280x800 1280x8
Supported Monitor Displays Signal MAC21” Refresh Rate (Hz) 75 118 Resolution 1152x870 Aspect Mode Normal 16:9 Full Zoom Native 1059x800 1280x720 1280x800 1280x800 1152x800 *1 Connection is disabled if the equipment does not have a VGA output port. *2 Only compatible when Normal is selected as the Resolution from the configuration menu. *3 Only compatible when VESA CVT-RB(Reduced Blanking) signal is input.
Supported Monitor Displays 119 Input signal from the HDMI/DVI-D input port Units: dots Signal * Refresh Rate (Hz) Resolution Aspect Mode 16:9 Full Zoom Native VGA 60 640x480 1280x720 1280x800 1280x800 640x480 SVGA 60 800x600 1280x720 1280x800 1280x800 800x600 XGA 60 1024x768 1280x720 1280x800 1280x800 1024x768 WXGA 60 1280x800 1280x720 1280x800 1280x800 1280x800 SXGA 60 1280x960 1280x720 1280x800 1280x800 1280x800 60 1280x1024 1280x720 1280x800 1280x800 1280
Specifications 120 Projector General Specifications EB-Z8050W Product name 534 (W) ^ 167 (H) ^ 734 (D) mm (not including raised section) Dimensions 0.95" Wide Panel size 1,024,000 pixels WXGA (1280 (W) ^ 800 (H) dots) ^ 3 Resolution Focus adjustment Zoom adjustment *1 Lens shift *1 2,304,000 pixels WUXGA (1920 (W) ^ 1200 (H) dots) ^ 3 Automatic Automatic (1-1.6) Automatic (Vertical direction: Maximum approx. 70%, Horizontal direction: Maximum approx. 20%) UHE lamp, 330 W Two-lamps Model No.
Specifications 121 Connectors Computer Input Port 1 Mini D-Sub15-pin (female) blue BNC Input Port 1 5BNC (female) HDMI Input Port * 1 HDMI HDCP compatible, CEC signal incompatible DVI-D Input Port * 1 DVI-D 24pin Single Link HDCP compatible Video input port 1 1BNC (female) S-Video input port 1 Mini DIN 4-pin Monitor Out port 1 Mini D-Sub15-pin (female) black LAN Port 1 RJ-45 Wireless LAN Port 1 USB connector (Type A) only for the wireless LAN unit RS-232C Port 1 Mini D-Sub 9-p
Specifications 122 Operating Conditions for the Software The software supplied with the projector runs on computers that meet the following requirements. EasyMP Network Projection EasyMP Monitor OS Windows 2000 SP4/XP/XP SP1/XP SP2/XP SP3/Vista/Vista SP1 Mac OS X 10.3 or later Recommended: Mac OS X 10.5.1 or later, 10.4.11/10.3.9 Windows 98 Second Edition SP1/Windows Me/Windows NT4.
Specifications 123 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appearance 124 A Center of lens B Distance from center of lens to suspension bracket fixing point Units: mm
Glossary 125 This section explains easily terms that are used with the projector and difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. AMX Device Discovery AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON).
Glossary 126 Progressive A method of image scanning whereby the image data from a single image is scanned sequentially from top to bottom to create a single image. Refresh Rate The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh Rate and is expressed in hertz (Hz).
General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Index 128 t indicator .................................................... 71 Cross .............................................................. 31 Customized ................................................... 23 H DHCP ............................................................ 52 Direct Power On .......................................... 50 Direction ....................................................... 50 Display ...........................................................
Index 129 Power inlet .................................................... 11 Power On Protect ........................................ 37 Presentation .................................................. 23 Problem Solving ........................................... 71 Progressive .................................................... 46 Projection ...................................................... 49 Projection lens .............................................. 10 Projection lens unit .................
Index V Video input port .......................................... 11 Video Signal ........................................... 47, 67 W Web Control Password ............................... 52 Wide-screen projection .............................. 25 Wired LAN ................................................... 52 Z Zoom .............................................................
