Specifications

F. No. 122/Anaes/RPC/SSK/12-13
Non – Invasive Pulse co-oximeter – 04 Nos.
1. Equipment should have Display type: High resolution TFTdisplay
2. Display of Pulse signal strength, plethysmograph and SpO
2
values, Pulse rate, Perfusion index & trend must be quoted
with additional parameters Oxygen Content (SpOC), Carboxyhemoglobin (SpCO), Methemoglobin(SpMet)
3. System should be upgradable to acoustic respiration rate
4. Display of short trend of SPO
2
or PR (selectable) along with plethysmograph
5. At least 72 hrs. Graphical trends for HR and SPO2., More than 10 days trending facility
6. Equipment should be defibrillator proof
7. Alarm System for low oxygen saturation, high pulse rate and low pulse rate
8. Should be FDA approved to work during low perfusion and during motion conditions.
9. Variable pitch provides tonal variance for change in saturation.
10. Detachable portable hand held for patient transport.
11. SPO2 range: 1 to 100%.
12. SPO2 mode.
13. Pulse rate (HR): 30 to 240 bpm.
14. Perfusion index 0.1% to 20%.
15. Alarm both audible & visible.
16. Adult, pediatric and neonate probe should be provided.
17. Rechargeable battery pack with auto charger for minimum 4 hr operation after mains failure.
Power: 220VAC, 50 HZ, Quality Standard: Valid CE or FDA or JIS certificate of the offered model must be
submitted