Operation Manual

Submenu Function
Progressive
(This setting can only be adjusted when a component video or
RGB video with an interlaced signal (480i/576i/1080i) is input.
This cannot be set when a digital RGB signal is input.)
Interlace g (i) signal is converted to Progressive g (p). (IP
conversion)
• For EB-X15
Off: Ideal for images with a large amount of movement.
Video: Ideal for general video images.
Film/Auto: This is ideal for movie films, computer
graphics, and animation.
• For EB-X14H/EB-X11H/EB-S11H
On: Ideal for still images.
Off: Ideal for images with a large amount of movement.
Noise Reduction
(EB-X15 only)
(This cannot be set when a digital RGB signal is input, when
projecting an interlaced signal while Progressive is set to Off, or
when a 480p, 576p, or 1080p signal is input while Image
Processing is set to Fast.)
Smoothes out rough images. There are two modes. Select your
favorite setting. It is recommended that this is set to Off when
viewing image sources in which noise is very low, such as for
DVDs.
HDMI Video
Range
(EB-X15 only)
When the projector's HDMI port is connected to a DVD player,
the projector's video range is set according to the DVD player's
video range setting.
Input Signal
You can select input signal from Computer port.
If set to Auto, the input signal is set automatically according to
the connected equipment.
If colors do not appear correctly when set to Auto, select the
appropriate signal according to the connected equipment.
Video Signal
You can select the input signal from the Video port. If this is set to
Auto, video signals are recognized automatically. If interference
appears in the image or a problem occurs such as no image is
being projected when set to Auto, select the appropriate signal
depending on the connected equipment.
Submenu Function
Aspect
You can set the
aspect ratio g for projected images.
s "Changing the Aspect Ratio of the Projected Image " p.39
Overscan
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. When
the source is HDMI, Auto is available (EB-X15 only). When
Auto is selected, it automatically changes to Off or 8% according
to the input signal.
Image Process‐
ing
(EB-X15 only)
Changes settings for image processing.
Fast: Images are displayed quicker. The pen's reaction time is
improved when using the optional interactive unit.
Fine: Images are displayed in higher quality.
Reset
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.63
List of Functions
59