Operation Manual

Name Function

Front adjustable foot

When setup on a surface such as a desk, extend the foot to

adjust the position of the image.

s "Adjusting the Image Position" p.36

Security cable

installation point

Pass a commercially available wire lock through here and

lock it in place.

s "Installing the wire lock" p.51

Control Panel

All of the features in this guide are explained using illustrations of EB-

X14H unless otherwise mentioned.

Name Function

[t] button

Turns the projector power on or off.

s "From Installation to Projection" p.26

[Source Search]

button

Changes to the next input source that is sending an image.

s "Automatically Detect Input Signals and Change the

Projected Image (Source Search)" p.27

[Enter] button

[

]

• When the Configuration menu or the Help screen is

displayed, it accepts and enters the current selection and

moves to the next level.

• If pressed while projecting analog RGB signals from the

Computer1 or Computer2 port, you can automatically

optimize Tracking, Sync., and Position.

Part Names and Functions