User`s guide
Table Of Contents
- Notations Used in This Guide
- Contents
- Introduction
- Preparing the Projector
- Basic Usage
- Projecting Images
- Adjusting Projected Images
- Useful Functions
- Configuration Menu
- Troubleshooting
- Using the Help
- Problem Solving
- Reading the Indicators
- When the Indicators Provide No Help
- Problems Relating to Images
- No images appear
- Moving images are not displayed (only the moving image portion turns black)
- Projection stops automatically
- The message Not supported is displayed.
- The message No Signal is displayed.
- Images are fuzzy, out of focus, or distorted
- Interference or distortion appear in images
- The image is truncated (large) or small, or the aspect is not suitable
- Image colors are not right
- Images appear dark
- Problems when Projection Starts
- Other Problems
- Maintenance
- Appendix
- Index
Notations Used in This Guide
• Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
• General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
a
Indicates additional information and points which may be useful to know regarding a topic.
s Indicates a page where detailed information regarding a topic can be found.
g
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendix".
s "Glossary" p.99
[Name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu Name Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness