Operation Manual

Correcting Distortion in the Projected Image

You can correct keystone distortion in projected images using one of the

following methods.

• H/V-Keystone

Correct distortion in the horizontal and vertical directions independently.

s "H/V-Keystone" p.63

• Quick Corner

Correct the four corners independently.

s "Quick Corner" p.64

• Curved Surface

Correct distortion that occurs when projecting on a curved surface, and

adjust the amount of expansion and contraction.

s "Curved Surface" p.65

• Corner Wall

Correct distortion that occurs when projecting on a surface with right

angles, such as a square pillar or the corner of a room, and adjust the

amount of expansion and contraction.

s "Corner Wall" p.76

• Point Correction

Corrects slight distortion which occurs partially, or adjusts the image

position in an overlapping area when projecting from multiple projectors.

s "Point Correction" p.86

Adjusting Projected Images