User's Guide

Table Of Contents

Projector Placement

You can place the projector on almost any flat surface to project an image.

You can also install the projector in a ceiling mount if you want to use it in a

fixed location. An optional ceiling mount is required when suspending the

projector from a ceiling.

Note the following points when selecting a projector location:

• Place the projector on a sturdy, level surface or install it using a compatible

mount.

• Leave plenty of space around and under the projector for ventilation, and

do not place it on top of or next to anything that could block the vents.

• Place the projector so it squarely faces the screen, not at an angle.

If you cannot install the projector squarely facing the screen, correct

any resulting keystone distortion using the projector controls. For the

best quality images, we recommend adjusting the installation position

of the projector to achieve the correct image size and shape.

Warning

• You must install a ceiling mount when suspending the projector from a ceiling.

If you do not install the projector correctly, it could fall and cause damage or

injury.

• Do not use adhesives on the ceiling mount fixing points to prevent the screws

from loosening, or use lubricants, oils, or similar substances on the projector; the

projector case may crack causing it to fall from its ceiling mount. This could

cause serious injury to anyone under the ceiling mount and could damage the

projector.

• Failure to install the ceiling mount and projector may cause the projector to fall.

After installing the specific Epson mount that supports your projector, make

sure you secure the mount to all of the projector's ceiling mount fixing points.

Also, secure the projector and the mounts using wire that is strong enough to

hold their weight.

• Do not install the projector in a location subject to high levels of dust or

humidity, or in a location subject to smoke or steam. Otherwise, it could cause a

fire or electric shock to occur. The projector's case could also deteriorate and be

damaged causing the projector to fall from the mount.

Examples of environments that could cause the projector to fall due to case

deterioration

• Locations subject to excessive smoke or airborne oil particles, such as factories

or kitchens

• Locations containing volatile solvents or chemicals, such as factories or

laboratories

• Locations where the projector could be subjected to detergents or chemicals,

such as factories or kitchens

• Locations in which aroma oils are often used, such as relaxation rooms

• Near devices that produce excessive smoke, airborne oil particles, or foam at

events