User's Guide
Table Of Contents
- Notations Used in This Guide
- List of Functions
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Setting the Date and Time
- Selecting the Language for the Projector Menus
- Projection Modes
- Displaying a Test Pattern
- Adjusting the Image Height
- Image Shape
- Resizing the Image with the Zoom Ring
- Focusing the Image Using the Focus Ring
- Selecting an Image Source
- Image Aspect Ratio
- Adjusting Image Quality (Color Mode)
- Controlling the Volume with the Volume Buttons
- Adjusting Projector Features
- Projecting Two Images Simultaneously
- Projecting a PC Free Presentation
- Shutting Off the Image and Sound Temporarily
- Stopping Video Action Temporarily
- Zooming In/Zooming Out of Images (E-Zoom)
- Saving a User's Logo Image
- Saving a User Pattern
- Color Difference Correction when Projecting from Multiple Projectors
- Projector Security Features
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Wireless Network Projection from a Mobile Device (Screen Mirroring)
- Secure HTTP
- Monitoring and Controlling the Projector
- Epson Projector Management
- Controlling a Networked Projector Using a Web Browser
- Registering Digital Certificates from a Web Browser
- Setting Up Projector Network E-Mail Alerts
- Setting Up Monitoring Using SNMP
- Using ESC/VP21 Commands
- PJLink Support
- Crestron Connected Support
- Setting Projector Event Schedules
- Adjusting the Menu Settings
- Using the Projector's Menus
- Using the Displayed Keyboard
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal Menu
- Projector Feature Settings - Settings Menu
- Projector Setup Settings - Extended Menu
- Projector Network Settings - Network Menu
- Projector Setup Settings - ECO Menu
- Projector Information Display - Info Menu
- Projector Reset Options - Reset Menu
- Copying Menu Settings Between Projectors (Batch Setup)
- Maintaining the Projector
- Solving Problems
- Projection Problems
- Projector Indicator Status
- Using the Projector Help Displays
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When Image is Incorrect Using the USB Display Function
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solutions When Image File Names are not Displayed Correctly in PC Free
- Solving Projector or Remote Control Operation Problems
- Solving Network Problems
- Solutions When Wireless Authentication Fails
- Solutions When You Cannot Access the Projector Through the Web
- Solutions When Network Alert E-Mails are not Received
- Solutions When the Image Contains Static During Network Projection
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring Connection
- Appendix
Projector Lamp Maintenance
166
a
• Make sure the lamp cover is securely installed or the lamp will
not turn on.
• Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
gg Related Links
• "Replacement Parts" p.185
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
a
Do not reset the lamp timer if you have not replaced the lamp to avoid
inaccurate lamp usage information.
a
Turn on the projector.
b
Press the [Menu] button, select the Reset menu, and press [Enter].
c
Select Reset Lamp Hours and press [Enter].
You see a prompt asking if you want to reset the lamp hours.
d
Select Yes and press [Enter].
e
Press [Menu] or [Esc] to exit the menus.