User's Guide
Table Of Contents
- Notations Used in This Guide
- List of Functions
- Introduction to Your Projector
- Setting Up the Projector
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Setting the Date and Time
- Selecting the Language for the Projector Menus
- Projection Modes
- Displaying a Test Pattern
- Adjusting the Image Height
- Image Shape
- Resizing the Image with the Zoom Ring
- Focusing the Image Using the Focus Ring
- Selecting an Image Source
- Image Aspect Ratio
- Adjusting Image Quality (Color Mode)
- Controlling the Volume with the Volume Buttons
- Adjusting Projector Features
- Projecting Two Images Simultaneously
- Projecting a PC Free Presentation
- Shutting Off the Image and Sound Temporarily
- Stopping Video Action Temporarily
- Zooming In/Zooming Out of Images (E-Zoom)
- Saving a User's Logo Image
- Saving a User Pattern
- Color Difference Correction when Projecting from Multiple Projectors
- Projector Security Features
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Wireless Network Projection from a Mobile Device (Screen Mirroring)
- Secure HTTP
- Monitoring and Controlling the Projector
- Epson Projector Management
- Controlling a Networked Projector Using a Web Browser
- Registering Digital Certificates from a Web Browser
- Setting Up Projector Network E-Mail Alerts
- Setting Up Monitoring Using SNMP
- Using ESC/VP21 Commands
- PJLink Support
- Crestron Connected Support
- Setting Projector Event Schedules
- Adjusting the Menu Settings
- Using the Projector's Menus
- Using the Displayed Keyboard
- Image Quality Settings - Image Menu
- Input Signal Settings - Signal Menu
- Projector Feature Settings - Settings Menu
- Projector Setup Settings - Extended Menu
- Projector Network Settings - Network Menu
- Projector Setup Settings - ECO Menu
- Projector Information Display - Info Menu
- Projector Reset Options - Reset Menu
- Copying Menu Settings Between Projectors (Batch Setup)
- Maintaining the Projector
- Solving Problems
- Projection Problems
- Projector Indicator Status
- Using the Projector Help Displays
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When Image is Incorrect Using the USB Display Function
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions to Sound Problems
- Solutions When Image File Names are not Displayed Correctly in PC Free
- Solving Projector or Remote Control Operation Problems
- Solving Network Problems
- Solutions When Wireless Authentication Fails
- Solutions When You Cannot Access the Projector Through the Web
- Solutions When Network Alert E-Mails are not Received
- Solutions When the Image Contains Static During Network Projection
- Solutions When You Cannot Connect Using Screen Mirroring
- Solutions When the Image or Sound Contains Static During Screen Mirroring Connection
- Appendix
Crestron Connected Support
119
If you are using the Crestron Connected network monitoring and control
system, you can set up your projector for use on the system. Crestron
Connected lets you control and monitor your projector using a Web browser.
a
• You cannot use the Message Broadcasting feature in Epson Projector
Management when you use Crestron Connected.
• If you set the Standby Mode setting to Communication On, you can
control the projector even if the projector is in standby mode (when
the power is off).
s ECO > Standby Mode > Standby Mode
For additional information on Crestron Connected, visit the Crestron Web
site.
https://www.crestron.com/products/line/crestron-connected
To monitor devices in the system, you can use Crestron RoomView Express
or Crestron Fusion provided by Crestron. You can communicate with the
help desk and send emergency messages. See the following Web site for
details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using a
Web browser.
gg Related Links
• "Setting Up Crestron Connected Support" p.119
• "Controlling a Networked Projector Using Crestron Connected" p.119
• "Projector Setup Settings - ECO Menu" p.147
• "List of Functions" p.10
Setting Up Crestron Connected Support
To set up your projector for monitoring and control using a Crestron
Connected system, make sure your computer and projector are connected to
the network. If you are connecting wirelessly, set up the projector using the
Advanced network connection mode.
a
Press the [Menu] button, select the Network menu, and press [Enter].
b
Select Network Configuration and press [Enter].
c
Select the Others menu and press [Enter].
d
Set the Crestron Connected setting to On to allow the projector to be
detected.
e
When you have finished selecting settings, select Complete and follow
the on-screen instructions to save your settings and exit the menus.
f
Turn off the projector, and then turn it on again to enable the setting.
Controlling a Networked Projector Using Crestron
Connected
Once you have set up your projector to use Crestron Connected, you can
control and monitor projection using a compatible Web browser.
a
Start your Web browser on a computer connected to the network.