ESC/VP21 Command User’s Guide for Business Projectors ESC/VP21 Command User’s Guide for Business Projectors
ESC/VP21 Command User’s Guide for Business Projectors Table of Contents 1. Introduction to ESC/VP21.................................................................................................................................. 3 2. ESC/VP21 Command Formats........................................................................................................................... 4 3. Applicable models ....................................................................................................
ESC/VP21 Command User’s Guide for Business Projectors 1. Introduction to ESC/VP21 ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper terminal. Since ESC/VP21 is independent of communication protocols.
ESC/VP21 Command User’s Guide for Business Projectors 2. ESC/VP21 Command Formats 2.1. Set command format A set command consists of a command and a parameter. Projector returns a colon after executing the command. There are two types of parameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or INIT. INC: increments the parameter by one. DEC: decrements the parameter by one. INIT: initializes the parameter. 2.2.
ESC/VP21 Command User’s Guide for Business Projectors 4. Projector state and commands 4.1. Standby state (Operation indicator is in orange) When a projector is in a standby state, executable commands depends on projector models and standby configuration (network on, network off). Refer to the following table.
ESC/VP21 Command User’s Guide for Business Projectors Command PWR ON PWR OFF (note4) SOURCE (note3) All others Models Others 830/835(note5) 7900/7950/740/745 61/81/821/S3/S4 600/800/810/811/820 Others 740745, 732/737, 821 S3/S4, 765/760/755/750, 830/835 82, 6100, 1715/1710/1705/1700, 1815/1810/1825, X5/822/823, 400W/410W, G5350/G5100/G5200W S6/X6/W6,1735W/1730W/1725/1720, 84/85/824/825/826W, and later model - Execution time 40seconds 20seconds 25seconds 130seconds 50seconds 20seconds 10seconds 5second
ESC/VP21 Command User’s Guide for Business Projectors 6. Error Status A projector returns the error status when a projector receives "ERR?" command. The following projectors can return the error status while the projectors become the error status after cooling down. EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/ EB-G5000/G5100/G5150/G5200W/G5300/G5350 And later models.
ESC/VP21 Command User’s Guide for Business Projectors 7. Command list and applicable models 7.1.
ESC/VP21 Command User’s Guide for Business Projectors Function Power Input source PinP setting A/V Mute Screen Command PWR SOURCE PINP MSEL AUTOKEYSTONE Auto Keystone G5350 G5300 G5200W G5150 G5100 G5000 S6/S62 X6/ W6 1735W/ 1730W/ 1725/ 1720 84/85/ 824/825 826W Z8000WU Z8050W S7/X7/ W7 S8 X8/ W8 1910/ 1915/ 1920W/ 1925W O O O O O O O O O O O O O O O O O O O O O O O O O - X6,W6 O O - - O O Only Aspect setting Color mode Lamp hour Brightness level A/V Mute Freeze Rear projectio
ESC/VP21 Command User’s Guide for Business Projectors 7.2.
ESC/VP21 Command User’s Guide for Business Projectors Function Command 825H/HV, 826WH/WHV, 85+, 825+, 824H 84H/He/L 84+ S10 W10 X10 S9/X9/W9 S92/X92 1760W 1770W 1775W 1750 1750G G5950 G5900 G5800 G5650W G5600 G5500 G5750WU G5450WU O O O O O W/O 93 95 96W 900 910W 905 915W 925 O Adjust the volume VOL O 5800/5500 Adjust the treble setting (Adjust the tone setting) TONEH Adjust the bass setting TONEL - - - - - - - Set brightness BRIGHT O O O O O O O Set contrast CONTRAS
ESC/VP21 Command User’s Guide for Business Projectors 8. Command Details 8.1. Command table 1 (Fixed parameter) Set commands PWR xx Get commands PWR? Parameter for set Models (Return code for get) Function ON OFF 00: “Standby” as the time of “Network off” All models Power ON/OFF 61/81, 830/835, 740/745/732/737 760/765, 821/828, 7900/7950.
ESC/VP21 Command User’s Guide for Business Projectors 05: Abnormal standby Set commands Get commands SOURCE XX SOURCE? PINP [source posX posy size] (Ex) PINP 42_1_ 2_ 1 ― PINP xx MSEL xx ― MSEL? 6100/6000, 1715/1710/1705/1700 1815/1810/1825, X5/822/823 G5350/G5300/G5150/G5100/G5000/G5200W S6/S62/X6/W6, 1735W/1730W/1725/1720 84/85/824/826W Z8000WU/ Z8050W, S7/X7/W7/S8/X8/W8 1900/1910/1915/1920W/1925W/1830 440W/450W/460, 84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+, 825+,826W+ S10/X10/W10, S9/
ESC/VP21 Command User’s Guide for Business Projectors AUTOKEYSTONE xx AUTOKEYSTONE? ON: Auto keystone ON OFF: Auto keystone OFF ASPECT xx ASPECT? 10:4:3 12: zoom 4:3 20: 16:9 10:4:3 20: 16:9 Input signal is PC 00: Normal 10: 4:3 20: 16:9 Input signal is Component/S-Video.
ESC/VP21 Command User’s Guide for Business Projectors 460/460T/460i/460e 1750 S9/S10/X9/S92/X92 455Wi/465i/465T CMODE xx CMODE? 00: Normal 10: 4:3 20: 16:9 30: Auto 60: Real G5100/G5300/ G5350 G5500/G5600/G5800/G5900/ G5950 00: Normal 10: 4:3 20: 16:9 30: Auto 1915 X8/X10 93/95/900/905/925 01: sRGB 02: Normal 03: Meeting 04: Presentation 05: Theatre 06: Game 01: sRGB 04: Presentation 05: Theatre 08: Dynamic 01: sRGB 04: Presentation 05: Theatre 06: Living Room 08: Dynamic 01: sRGB 04: Presentation 05
ESC/VP21 Command User’s Guide for Business Projectors Set commands CMODE xx Get commands CMODE? Parameter for set (Return code of get) Models 01: sRGB 03: Presentation2 04: Presentation 05: Theatre 06: Dynamic 08: Sports 10: Custom 11: Black Board 14: Photo 01: sRGB 03: Presentation2 04: Presentation 05: Theatre 06: Dynamic 08: Sports 11: Black Board 14: Photo 01: sRGB 04: Presentation 05: Theatre 06: Dynamic 08: Sports 11: Black Board 12: White Board 14: Photo 01: sRGB 04: Presentation 05: Theatre 06:
ESC/VP21 Command User’s Guide for Business Projectors Set commands Get commands - LAMP? LUMINANCE xx LUMINANCE? Parameter for set (Return code of get) 0 ~ 65535 Z8000WU/Z8050W: 0~65535_065535(*) 00: High 01: Low 00: Normal 01: Eco Models All models 73/53/74/54, 7800/7850 8300/8350/9300, 61/81 830/835, 740/745, 821 7900/7950, 732/737, S3/S4 760/765, 755/750, 82, 6100 1715/1710/1705/1700 1815/1810/1825, X5/822/823 G5350/G5100/G5200W S6/X6/W6 1735W/1730W/1725/1720 84/85/824/825/826W Z8000WU/Z8050W S7
ESC/VP21 Command User’s Guide for Business Projectors 24: TEXT4 00: OFF 11: CC1 12: CC2 FLWARNING xx FLWARNING? FLTIME x1 x2 FILTER? ZOOM ZOOM? FOCUS FOCUS? LENS LENS? 00: ON 01: OFF 83/822/83+/822+ 400W/410W G5350/G5300/G5150/G5100/ G5000/G5200W 84/85/824/825/826W Z8000WU/Z8050W S7/X7/W7 1830/1900/1910/1915/ 1920W/1925W 84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+, 825+,826W+ S9/X9/W9/S92/X92 G5950/G5900/G5800/G5650W/ G5600/G5500/G5750WU/G5450WU 1760W/1770W.
ESC/VP21 Command User’s Guide for Business Projectors HLENS MIN: Adjusts it to left side continuously. MAX: Adjusts it to right side continuously INC: Adjusts it to right side by one step. DEC: Adjusts it to left side by one step OFF: A continuous adjustment is stopped. INIT: The lens position is moved to center. VOID HLENS? 8.2. Z8000WU/Z8050W Horizontal lens shift is adjusted.
ESC/VP21 Command User’s Guide for Business Projectors S10/X10/W10, S9/X9/W9/S92/X92 G5950/G5900/G5800/G5650W/ G5600/G5500/G5750WU/G5450WU 1760W/1770W.
ESC/VP21 Command User’s Guide for Business Projectors VKEYSTONE xx 0 -90 ~ 90 1815/1810/1825 1760W/1770W.
ESC/VP21 Command User’s Guide for Business Projectors 9. Appendix 9.1. Communication specification A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the projector.
ESC/VP21 Command User’s Guide for Business Projectors USB connection (600/800/810/811/820, 720/730/520, 73/53/74/54, 735, 8300/9300, 7800/7850, 61/81, 830/835, 740/745/732/737/760/765, 821/828, 7900/7950, S3/S4, 755/750, 62/82/X3, 1715/1710/1705/1700, S5/X5/EX90,260, G5350/G5150, S6/X6/W6, 1735W/1730W/1725/1720, S7/X7/W7, S8/X8/W8, 1925W/1920W/1915/1910, W10/X10/S10/EB-W9/X9/S9/X92/S92/EX7200/1260/W10+/EX5200/1220/X10+/EX3200/S10+/S9/VS200, 1760W/EB-1770W/1775W/750) ・ For 600/800/810/811/820, 74/54, select
ESC/VP21 Command User’s Guide for Business Projectors 10. Revision History Revision A B Issued date Sep 16, 2005 Oct 19, 2005 Page All pages All pages Description First release. Correction of disclaimer.
