Specifications

Error Messages Remedy
To use EasyMP Slide Converter, PowerPoint
®
2002 or a later
version must be installed.
Reinstall EasyMP Slide Converter after installing PowerPoint 2002 or later.
s p.12
Close PowerPoint
®
, then convert the file. When PowerPoint is running, the conversion process may not complete normally. Close PowerPoint, then
convert the file.
The file cannot be saved to the specified location. Specify
another location and try again.
There are times when you may not be able to save a file such as if you do not have write access to the specified
folder. Specify another location and try again.
The file could not be copied to the specified location. Specify
another location and try again.
There is not enough available space in the specified location.
Specify another location and try again.
Insufficient free space in the specified drive. Failed to save the file. Make space in the drive so that the file can be
saved by deleting any unnecessary files.
The file cannot be copied because there is not enough available
space in the specified drive.
Insufficient storage capacity in the drive to transfer scenario. Cannot transfer the scenario. Make space in the
drive so that the scenario can be sent by deleting any unnecessary files.
This file cannot be written to the specified location because there
is not enough available space.
Cannot write the file to the specified location as there is insufficient free space for a file to which AutoRun is set.
Make space so that the file can be written by deleting any unnecessary files.
"Convert to FSE" is not displayed in the PowerPoint right click menu.
Check Remedy
Was PowerPoint installed after installing EasyMP Slide Converter? The menu may not be displayed, if PowerPoint is installed after installing EasyMP Slide Converter. Reinstall
EasyMP Slide Converter.
Problems Concerning Monitoring and Control
Mail is not sent even if a problem occurs in the projector.
Check Remedy
Is the Wireless LAN unit connected?
For Wireless LAN
Check that the supplied or optional Wireless LAN unit is securely connected.
Is the network connect setting correct? Check the projector's network settings. s User's Guide "Network Menu (for EB-1925W/1915)"
Troubleshooting
87