Specifications

Registering a CA Certificate
Procedure
A
Connect the USB storage device on which the Digital
certificate is stored to the projector and start PC Free.
The file list screen is displayed.
B Press the [ ][ ][ ][ ] buttons on the remote
control to position the cursor over the CA certificate (CER
file) icon and press the [Esc] button.
C
Select "CA certificate" from the menu displayed, then press
the [Enter] button.
D When information on the certificate is displayed, check that
the content is correct, and then position the cursor over
"OK" and press the [Enter] button.
When the message "CA certificate obtained. Restart." is displayed,
registration is complete. Press the [Enter] button, to turn off the
projector. After you press the [
t] button to restart the projector,
the certificate is authenticated. If authentication is successful, the
IP address is displayed.
Registering a Digital Certificate to the Projector
78