Specifications

When Security is set to EAP-TLS from the projector's Network menu,
you need to register the client certificate and the CA certificate in the
projector for authentication.
Save the client certificate and the CA certificate are in a USB storage
device, and register to the projector with PC Free.
q
• The client certificate and the CA certificate need the extensions
PFX (.pfx) and CER (.cer) respectively.
• Only one set of client certificate and CA certificate can be
registered in the projector. If another digital certificate is
registered, it overwrites the previous certificate.
Registering a Client Certificate
Procedure
A Connect the USB storage device on which the Digital
certificate is stored to the projector and start PC Free.
s p.56
The file list screen is displayed.
B Press the [ ][ ][ ][ ] buttons on the remote
control to position the cursor over the client certificate (PFX
file) icon and press the [Esc] button.
C Select "Digital certificate" from the menu displayed, then
press the [Enter] button. The following window is displayed.
D Enter the password using the soft keyboard. (You can enter
up to 32 alphanumeric characters)
s
User's Guide "Soft
keyboard operations"
E When information on the certificate is displayed, check that
the content is correct, and then position the cursor over
"OK" and press the [Enter] button.
When the message "Digital certificate imported." is displayed,
registration is complete.
Registering a Digital Certificate to the Projector
77