Specifications

J Remove the USB storage device from the computer.
See the computer's user's guide for the removal method.
K After finishing transferring your scenario, connect the USB
storage device to the projector and start projection using PC
Free.
s p.56
q
When the resolution of the projector that is projecting the scenario
is XGA type, scenarios for which WXGA (1280 x 800 dots) is set
cannot be played back. Project after converting the PowerPoint file
to an XGA (1024 x 768 dots) scenario file.
Converting Directly from a PowerPoint File to a
Scenario
This section explains how to convert directly from a PowerPoint file to
a scenario.
q
This is useful when you want to convert without modifying any
settings. Because the settings from the Set screen are reflected
during conversion, check the settings before hand when After
converting a file, copy it to memory is not selected.
Procedure
A Drag & drop the PowerPoint file icon to the EasyMP Slide
Converter program icon on the desktop. Or, right click the
PowerPoint file and select " Convert to FSE".
Note that, in this case, it is not possible to select multiple
PowerPoint files and convert them. Select only one file for
conversion.
EasyMP Slide Converter starts.
B When "After converting a file, copy it to memory." is
selected on the Set screen, the Set screen is displayed. Go
to procedure 4
s
"Converting to a Scenario".
When "After converting a file, copy it to memory." is not
selected, click "Convert" on the confirmation screen to
convert the file.
Converting the file to a scenario starts. When Play a slideshow
and convert files is selected from Conversion Mode, the
Slideshow is displayed.
C When "After converting a file, copy it to memory." is not
selected, the main screen is displayed when conversion is
complete.
When "After converting a file, copy it to memory." is
selected, go to procedure 6
s
"Converting to a Scenario".
Converting PowerPoint Files to Scenarios
72