Specifications

q
• For Play a slideshow and convert files, it is automatically
modified to use the screen's resolution depending on the
projector's resolution (XGA or WXGA). After conversion, it
returns to the previous screen resolution.
• If PowerPoint is running. the conversion process cannot be
performed. Close PowerPoint before starting conversion. Also, do
not start PowerPoint during conversion.
• During conversion, do not modify the display setup such as
changing the resolution or connecting an external monitor. If the
display setup is changed, conversion is canceled.
• If After converting a file, copy it to memory is not selected on
the Set screen, the screens from procedure 6 are not displayed.
When the main screen is displayed, preview a scenario or copy
to memory by using the appropriate buttons on the main screen.
F When the Preview confirmation screen is displayed after
conversion is complete, click "Yes". If you do not want to
view the Preview, click "No" and go to procedure 7.
The Preview screen is displayed. The following table shows the
functions of each button.
Play
Starts preview. Also, this restarts stopped or paused
scenarios. If Animations in PowerPoint files are not
played back automatically, Animations can be played
back one after another by pressing the Play button.
Pause
Pauses the Preview. When the Pause button is
pressed while Animations are being played back, the
Animation is paused.
Stop
Stops playback and returns to the first slide.
Previous
Slide
Returns to the previous slide.
Next Slide
Advances to the next slide.
When the preview has finished, close the Preview screen.
q
Jpeg (SIT) files cannot be previewed with the Preview function.
When Perform simplified conversion is selected from Conversion
Mode, the Copy confirmation screen is displayed but the Preview
confirmation screen is not displayed.
G When the Copy confirmation screen is displayed, click "Yes".
Converting PowerPoint Files to Scenarios
70