Specifications

In Movie Sending Mode, movie files can be sent directly to a projector.
As a result, a movie can be projected much more smoothly than when
it is being sent from an application running on a PC.
Also, because the audio is sent at the same time as the movie, there is
no need for an audio cable between the computer and the projector.
You can set to play back selected multiple files repeatedly and in order.
q
• Movie Sending Mode is valid for one projector only.
It is not possible to apply Movie Sending Mode to more than
one projector.
• Depending on the communication method and the available
reception, the image and sound may skip or stall.
Supported File Types
The file types supported by Movie Sending Mode are listed in the
following table.
File Type
(Exten-
sion)
Video Codec Audio Codec Recording
Quality
.mpg
.mpeg
MPEG-2 MPEG-1 Layer1/2
MPEG contents with no sound
can be played back. Linear PCM
and AC-3 audio cannot be
played back.
Highest frame
rate: 30 fps
Maximum reso-
lution: 720×576
.mp4 MPEG-4 ASP
MPEG-4 AVC
MPEG-4
AAC-LC
.wmv
.asf
WMV8
WMV9
WMA
Files to which DRM (Digital Rights Management) is applied cannot be
projected.
Playing Back a Movie
Procedure
A Click the button on the toolbar.
The projector selection screen is displayed.
B
Select the projector you want to use to playback the movie
and click "OK".
The Movie Sending Mode screen appears.
C
Click "Select file".
D Select the movie file you want to play back and then click
"Open".
Projecting Movies from a Computer (Movie Sending Mode)
27