Specifications

Operating the Projector

Before connecting, put the projector into connection standby status.

Make sure the projector network settings are complete, and the

projector is connected to network equipment such as a network hub via

a commercially available network cable.

Procedure

Press the [t] button on the remote control to turn the

power on.

Press the [LAN] button on the Remote Control.

The LAN standby screen is displayed.

Operating the Computer

In the following explanations, unless otherwise noted, Windows screen

shots are used. You see the same screens even when using Macintosh.

Procedure

Start EasyMP Network Projection.

For Windows

Select Start - Programs (or All Programs) - EPSON Projector -

EasyMP Network Projection.

For Macintosh

Double-click the Applications folder of the hard drive volume in

which EasyMP Network Projection is installed, and then

double-click the EasyMP Network Projection icon.

Select "Quick Connection Mode" (Only when the supplied or

optional Wireless LAN unit is installed) or "Advanced

Connection Mode" and then click "OK".

The projector search results are displayed. To always connect

using the same Connection Mode, select Set the selected

Connection Mode as the default mode for future connections.

Select the projector you want to connect to, and then click

"Connect".

If the projector you want to connect to is not displayed in the

search results, click the Automatic search button. The search

takes about 30 seconds.

For details on the connection screen, see "Using the Connection

Screen".

s p.20

When Projector keyword is set to "On" from the projector,

the Keyword entry screen is displayed. Enter the keyword

displayed on the LAN standby screen, and then click "OK".

When the connection is complete, the computer screen is

projected. The following EasyMP Network Projection toolbar is

displayed on the computer screen. You can use this toolbar to

Connecting to a Projector on a Network and Projecting